• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2016 Ga Military Vehicle Rally buy/sell/trade thread

Status
Not open for further replies.

Swamp Donkey

The Engineer
Steel Soldiers Supporter
1,450
121
63
Location
Gray, GA
Included are new air wiper motors, window roller mechinisms (one right, one left).
If these fit the M939 trucks I need a package price for all the items in the quote. Not sure if the other 5 Ton series trucks used the same wiper motors is the reason I ask.
 

wreckerman893

Possum Connoisseur
15,630
2,063
113
Location
Akenback acres near Gadsden, AL
If these fit the M939 trucks I need a package price for all the items in the quote. Not sure if the other 5 Ton series trucks used the same wiper motors is the reason I ask.
I've already got all this stuff packed in the truck. Not really sure exactly what I have. Come by my AO and we can "bundle" stuff.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
327
0
Location
gainesville, ga.
I found some more items:

These are NOS

11664387Clutch Disc For 5 Ton Trucks M809 and M54A2 (M39A2) Series
8735507Pressure Plate 5 Ton Trucks M809 and M54A2 (M39A2) Series


CUCV 1010 & 1028/205 Transfer Case Shifter

M100 Landing Leg taken off my M100
Are you sure on the 5t clutch, you HAVE a m62 that happens to use the same clutch ? and a friend that has a 5t that ALSO uses the same clutch. SAME goes for this 800 Series Air Pack (NOS), though the friend has a rebuild kit and besides he will have air brakes soon, the 62 still may need it.

Also how much for the 5t temp sender and gauge (if metal gauge)
 
Last edited:

TruckGuy

Member
141
24
18
Location
Belmont, NC
Deuce parts to sell

Anyone else want Deuce parts?


Injection pump/HH (pulled from rebuild create engine) - $650
Trans PTO + Linkage - $450
PTO full rebuild Kit - $50


NOS fuel cap - $10
NOS winter grill cover - $40
Soft top frame good condition - $75


Winch seal + gasket kit - $75
Winch gasket kit - $15

Winch worm gear - $75
Oil filter cans + centers - $20

Winch Cable - $130
All bolts needed to mount winch (Grade 8 ) - can send a list - $130

New front wiring harness (for older Deuce) + Alternator wiring harness - $70


Misc winch parts - make a offer…


frontharness.jpgwinchcable.jpgwinchbolts.jpgip.jpgtopframe.jpgpto1.jpg
 

swiss

Well-known member
Steel Soldiers Supporter
2,733
863
113
Location
Oakwood, Ga
Are you sure on the 5t clutch, you HAVE a m62 that happens to use the same clutch ? and a friend that has a 5t that ALSO uses the same clutch. SAME goes for this 800 Series Air Pack (NOS), though the friend has a rebuild kit and besides he will have air brakes soon, the 62 still may need it.

Also how much for the 5t temp sender and gauge (if metal gauge)
Are you not enjoying the Rally, should be more going on there than on site? Everything is for sale in life for the right price :)
 

Chief_919

Well-known member
2,050
103
63
Location
Western NC
Some last minute stuff in I can bring-

OE-254 antenna set, complete, even has the lube and sledgehammer. $275

Stretchers, correct for the CUCV or HMMWV ambulance, 4 available. They look virtually new $35 each. Make good cots for the camp sight too.

HMMWV pioneer racks, used $35 each 2 available.





 

army70deuce

Member
106
3
18
Location
Anderson, SC
Assuming I get the truck ready I will be at the GA rally with 4-5 Deuce NDTs, 2 MRAP jump seats with mounts, the center gears from a deuce rockwell axle, and anything else I can find to get rid of. First come first served and priced to move extremely quickly. i.e you get it or the scrappers do.

now to get back to working on the truck
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
327
0
Location
gainesville, ga.
I have a box of mv maG, mvpa reads, radio batteries and a container lock, FREE,first person to ask is the person to get, ALL or NON
 
Last edited:
665
7
18
Location
Madison Alabama
Assuming I get the truck ready I will be at the GA rally with 4-5 Deuce NDTs, 2 MRAP jump seats with mounts, the center gears from a deuce rockwell axle, and anything else I can find to get rid of. First come first served and priced to move extremely quickly. i.e you get it or the scrappers do.

now to get back to working on the truck
PM sent
 
Status
Not open for further replies.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks