2023 TX MV Rally Buy/Sell/Trade Thread

[m715mike]

The 2023 Texas MV Rally will be held on March 24-26. Here's a link to the rally thread: https://www.steelsoldiers.com/threads/2023-tx-mv-rally.213025/

Feel free to list items in this thread that you want to buy, sell or trade at the Off-Road Ranch.

As part of the rally, we will attend the Living History event at the Museum of the American G.I. on Saturday, March 25. There will be vendors at the Museum on Saturday. These vendors rent a space from the Museum and pay fees for the privilege to sell their goods. If you wish to sell items at the Museum, please contact them directly (http://americangimuseum.org/). Otherwise, please keep all buy/sell/trade activities at the Off-Road Ranch.


Let's see what you have to buy, sell or trade!

 

[CARNAC]

Bunch of tools (snap on and sk mainly )
2 x litters
1/2” torque wrench I think goes to 600ft lbs.
Pair of sf radios
satcom antenna
bdar kit
a few hardigg and pelican cases
bunch more stuff

 

[m715mike]

I have two battery boxes that I’d part with. $25 each delivered to the rally.

 

[m715mike]

I also have two dual chamber air tanks for sale. $60 each delivered to the rally.

 

[CallMeColt]

HMMWV highback seats. Used but in serviceable condition.

 

[CallMeColt]

HMMWV soft doors. Drivers side front and passenger rear (I think?). As usual, they need stitching but everything else is there and good.

 

[CallMeColt]

Brand new FMTV steering linkage with tie rods.

 

[CallMeColt]

I also could bring anything that is listed on my eBay store. You can get there from my website in my signature.

 

[98G]

We're in KS for the moment. If we're still here in late March I'll try to make the drive in the M998 and attend.

Things I have to bring if there's any interest:

Safes of all descriptions, from 100lb single drawer safes up through >1200lb GSA weapons containers. Locking mechanisms can be electronic or mechanical. Talk to me about details and we'll pick you one out.

60mm mortar ammo cans. $20 each.

Slave cables, made to order.

M200A1 trailer. $1k. Clean UT title.

M1102 genset trailer $1200. Not titled.

A hemtt rim with a decent 16.00 XZL on it $400.

Heavy towbars with feet that fit a 5ton. $400.

MEP802 skid with toolbox and cable reel. $200.

10 ton AC / 120,000 BTU ECU. $400.

And anything else i have listed in the classifieds.

 

[CARNAC]

Quasi mil related…..
I have two large cookoo clocks I bought while it was stationed in WEST GERMANY . If anyone knows a collector or interested in buying them, I can bring them. Photo of one attached but the second is generally similar. I also have a bunch of old GI Joe Stuff from the 1990’s. And two of the old 1960’s vintage jeeps with trailers and the 106mm recoilless rifle. I’ll bring these items only if someone requests me to.

i have some glove size m and xl.

the tool cutouts for the pelican toolbox 0450.

wrenches

hardigg cases

 

[CARNAC]

These cases also. The tools here are the double box snap on….805 set I think. The double open end Set, no clue of the set number. A bunch of sae and mm hex and some swivel sockets. Most are snap on but there might be a sk or two mixed in there. Russian map case I got tradinf with Russians rightafter the fall of the Berlin Wall….yes I was there. CTC lineman’s pouch.

 

[Barrman]

OK Carnac. The last time you were at the Rally 4 years ago I bought several of your Snap-On impact socket sets. Since I am a Snap-On snob, I always need more. Specifically metric combination wrenches are my current need. Maybe a 3/8 and or 1/4 torque wrench too. I don’t need cases, boxes or storage either. Just fishing for what you have available.

Thanks, Tim

 

[CARNAC]

WANTED…..WANTED
This type of ECS loadmaster case. With or without wheels.
approximate size is 22x14x10. Non-gold plated.

if you have other sizes, I might be interested.


also looking for two gray hardigg footlockers. Must be gray. I’ll try to post a photo of one late.

 

[CARNAC]

OK Carnac. The last time you were at the Rally 4 years ago I bought several of your Snap-On impact socket sets. Since I am a Snap-On snob, I always need more. Specifically metric combination wrenches are my current need. Maybe a 3/8 and or 1/4 torque wrench too. I don’t need cases, boxes or storage either. Just fishing for what you have available.

Thanks, Tim

unfortunately, all the wrenches are SAE. Don’t have the other stuff either. Sorry.

 

[Rhino 5/4]

Set of M715/M725 axles, front hubs have lock outs good breaks and drums, all working when I did swap.
5ea 37" XMLs mountet on M715 wheels
Lots of pull off parts for M725 interior.
More interested in finding a good home for all this than making money so make me an offer.
Will be at event Friday night through Sunday.
I am in need of a gauge cluster panel and passenger side grab bar if anyone has them please let me know.

 

[m715mike]

Bump!

We are less than a week out from the rally.

I think I have an extra tan cover for a M105 trailer. If anyone is interested, I can get it out before the rally.

 

[OL AG '89]

I may bring the STE-ICE, military laptop and possibly a set of slave cables.

 

[BDGR]

I may bring the STE-ICE, military laptop and possibly a set of slave cables.

What price for the laptop?

EDIT: i did not see the comma. for clarification, is the laptop for the STE-ICE? I have a STE-ICE kit, but no program or any way to read it

 

[CARNAC]

I’ll start packing up tomorrow. Bringing a bunch of stuff from storage. So much stuff I can’t rmember it all. The house clearing continues.

 

[kendelrio]

Being as I'm going to be offshore, I hope you all get fleas in your sleeping bags and athletes foot on your... feet!


Kidding! I hope you all have a great time and I HATE I'm missing it!