roofconsult
Member
- 53
- 0
- 6
- Location
- Baton Rouge, LA
I have a problem with the horn wire in the steering shaft. There is resistance between the horn button connecting plug and the contact sleeve on the steering shaft that I believe is keeping my horn from working. When I ground the wire that goes to the box at the bottom of the steering column the horn works fine. But if I ground the wire that comes out of the top, center of the steering shaft, the horn won't blow. I can't figure out how to get the wire out of the shaft. I took the steering column assembly out of the truck but can't figure out how to get the steering shaft out of the outer column. The TM's don't have anything about this. There is another post about this, but no information. Can anyone offer any help?
Thanks.
Thanks.