Superthermal
Well-known member
- 272
- 781
- 93
- Location
- Utah, Murray, United States
What bead lock rims on a 5 ton will get a 16.00 tire to mount with near perfect scrub radius? Also it looks like some rims /hub flipping etc... cause a significant offset to the track width of the front and rear axle as shown below on a M54ish ride. What combination of wheels gets this accomplished? I want interchangeability for my tires and I have read chat about using one type on the front and another on the back is common. There are very significant bonuses to having the scrub radius perfect and having the track width the same is a total bonus on snow wheeling as well. HEMTT rims seem to be the primary choice of super single runners.. but is that the best option? Has anyone looked and documented the kingpin angle to the tire patch as seen below? Where does it land?
![1640932323861.png 1640932323861.png](https://www.steelsoldiers.com/data/attachments/609/609925-7600c7df88ce4a657901f38d69860d68.jpg)
![1640932421403.png 1640932421403.png](https://www.steelsoldiers.com/data/attachments/609/609926-51375cec4c7fde6a5ad5ef48e8616034.jpg)
![1640932443720.png 1640932443720.png](https://www.steelsoldiers.com/data/attachments/609/609928-46aa57622a2109ab87f20d71cbe5fca4.jpg)
![1640932323861.png 1640932323861.png](https://www.steelsoldiers.com/data/attachments/609/609925-7600c7df88ce4a657901f38d69860d68.jpg)
![1640932421403.png 1640932421403.png](https://www.steelsoldiers.com/data/attachments/609/609926-51375cec4c7fde6a5ad5ef48e8616034.jpg)
![1640932443720.png 1640932443720.png](https://www.steelsoldiers.com/data/attachments/609/609928-46aa57622a2109ab87f20d71cbe5fca4.jpg)
Attachments
-
1.1 MB Views: 7