• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

6.2 question??

Mjvaden

Member
135
2
18
Location
Madison ga
Would a 6.2 out of a CUCV work as a replacement for a 6.2 out of a m998?

I have every thing still on the m998, fuel pump, alternator etc.

thanks, Mike
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Identical. You will need to use the 24v fuel shutoff from the HUMVEE
 

Barrman

Well-known member
5,266
1,782
113
Location
Giddings, Texas
The oil pan, exhaust manifold, pulleys and IP top lid are different. Along with the oil psi sender and temp sender. Everything else is the same. Do a new rear main seal when swapping oil pans.
 

ZZ4x4

Member
86
2
8
Location
Sachse, TX
Some additional differences that come to mind :
The coolant cross-over pipe is different due to the HMMWV fan switch
Tachometer drive. The CUCV has the vacuum operated tach drive and the HMMWV has an electrical unit.
Mechanical Trans modulator connected to IP throttle lever on HMMWV
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks