• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

802A AUX pump?

LEOK

Active member
125
26
28
Location
Gainesville/Fl
If your using aux tank for refills with bung adapter and 55 gallon drum empties, will aux pump running dry harm it? How long should it take to prime with dry hose in full 55 gallon drum. Should have asked sooner as ETA will be here Wednesday
 

jcollings

Well-known member
Steel Soldiers Supporter
560
391
63
Location
Jupiter/FL
I have an 803a
802 Should have the same set up.
When you are on the auxiliary feed and selector switch, it pumps to fill the day tank on board and once that is full it stops pulling from auxiliary and then runs off the day tank on board until it goes low again and then pulls from auxiliary again etc. I don't know if that helps or not.

Sent from my SM-G975U using Tapatalk
 

LEOK

Active member
125
26
28
Location
Gainesville/Fl
I know that, but if you let aux run dry it seems the aux pump will keep running will that harm it?
Also for those with experience how long prime with dry aux hose via bung adapter
 

LEOK

Active member
125
26
28
Location
Gainesville/Fl
Eta turned out to be not much in Gainesville Fl. Lights flicker one time at 3:30am, Very little rain, winds stay up high above most trees, was over quickly
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks