leecarr
New member
- 14
- 0
- 0
- Location
- Rochester, MA
We are getting started on a hoist installation on our 813 (The Master Blaster). We decided to use the original cargo body because of the different types of material to be hauled.
Using the rear pto output to power the pump, don't have controls or linkage for rear pto output or hyd. valve so we (we meaning mostly my son) are making it. We wanted plenty of lift capacity and height so we went with a front mounted telescopic piston set up, piston and hinge have 45 ton capacity. We removed the passenger side tool box and placed the hyd. tank and a step on the existing brackets. More pics. as we go along.
Using the rear pto output to power the pump, don't have controls or linkage for rear pto output or hyd. valve so we (we meaning mostly my son) are making it. We wanted plenty of lift capacity and height so we went with a front mounted telescopic piston set up, piston and hinge have 45 ton capacity. We removed the passenger side tool box and placed the hyd. tank and a step on the existing brackets. More pics. as we go along.
Attachments
-
42.8 KB Views: 68
-
37 KB Views: 73
-
45.2 KB Views: 72
-
40.5 KB Views: 68
-
31.1 KB Views: 70
-
56.6 KB Views: 69