- 2,868
- 27
- 48
- Location
- Delta, PA.
Does anyone know what the max. height the boom is when fully extended? And max.reach when fully extended?? THANKS..JOHN
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
816 wrecker boom height?????
- Thread starter jcappeljr
- Start date
drgreg
Banned
- 3,623
- 94
- 0
816- boom will extend 10 to 18 feet and elevate to 45deg.
819- " " 11'6'' to 26 feet " "
or 28 ft. depending on TM used.
819- " " 11'6'' to 26 feet " "
or 28 ft. depending on TM used.
Last edited:
- 2,868
- 27
- 48
- Location
- Delta, PA.
Thanks,now I need the height at end of boom when fully extended.
Coldfusion21
Member
- 227
- 6
- 18
- Location
- Tualatin, Oregon
well its a right triangle, so we know all three angles and one side length.
I thought about it for a long time, but that trig has been un-used for a few to many years.
I thought about it for a long time, but that trig has been un-used for a few to many years.
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
Wait, I read it wrong, one sec/
Last edited:
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
Is it fully extended at 18' ? If it is, then 12.7 ft + height of pivot.
- 2,868
- 27
- 48
- Location
- Delta, PA.
Are you saying 12'7" plus height from ground to pivot point? I looked in the manuals couldnt find it.I was trying to get an easy answer without pulling the truck out of the shop and checking it.
Coldfusion21
Member
- 227
- 6
- 18
- Location
- Tualatin, Oregon
Yea, he's right. finally figured it out. 12.7 to the pivot point on the boom. so measure from the ground to the boom pivot and add 12.7.
That assumes 18ft boom extension with a 45 degree angle to the ground.
That assumes 18ft boom extension with a 45 degree angle to the ground.