• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

ABS relay valve

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
326
0
Location
gainesville, ga.
Can a ABS relay valve work like a normal relay valve if the ABS is not hooked up, sensors cut???
 

davo727

Member
742
2
18
Location
Cleveland, TX , Spring , TX
Yes the Haldex system reverts to standard air brake operation if power is lost. I would think if it loses a sensor or has a wiring fault its going to put on the inop light on the dash and revert to non ABS operation.
 

rosco

Active member
Steel Soldiers Supporter
2,102
30
38
Location
Delta Junction, Alaska
Yes the Haldex system reverts to standard air brake operation if power is lost. I would think if it loses a sensor or has a wiring fault its going to put on the inop light on the dash and revert to non ABS operation.
I think your right - otherwise your brakes would be inoperative. However, its not uncommon for those valves to go bad, especially if they have had a history of a contaminated air system, like bad drier, etc. If I had an OTR truck with an inop ABS system, I would be horrified at the prospect of a DOT roadside inspection, just thinking about the cost of the fine.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks