orgnal
Member
- 285
- 4
- 18
- Location
- Denver, CO
Is it possible to switch out the military seats for after market seats? Would a comfy car seat fit in the space available? Has anybody done this? if yes, can you please share pictures? Thanks in advance.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
After market seats or alternate seats for HMMWV / m998 ?
- Thread starter orgnal
- Start date
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
No pictures, sorry, but I have Citoen BX (ghostbuster) car seats in my M54A2 Camper. Comfy,..it's what you do as you..."age". And anyone can figure out the change with a little nounce.
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
Seen someone with ... Smittybilt seats. $139 each I believe.
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
Just finished replacing all 4 of my seats last night. I'll post some pics for you later tonight.
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
Auctionaddict has some neat seats in one of his HMMWVs. But I don't recall what they're out of. They were some sort of MRAP though as I recall. Much more comfortable than the stock pincushions.
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
Here's my high-top
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
I installed 4 of these. They were described as MRAP seats and are quite a nice upgrade. The seats can move front to back and the seatback inclines/declines. Sorry for just the one picture. The lighting in my garage is terrible and the pictures are not coming out great. I'll snap some more off in the morning.
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
Hmm they are nice. I have the bar behind my front seats so.. Reclining isn't an option lol
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
We all do. But as long as you're not too tall, you can move the seat a few clicks forward and recline it pretty good.
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
Oh ya upon closer inspection.. I see your bar. I may have to look into a pair of those for the fronts..
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
Although.. These don't seem too bad for the price.
ThunderSquirrel
Member
- 85
- 2
- 8
- Location
- Aurora, CO
How involved is it to remove the original style driver seat frame and replace it with the newer high back frame/mount.? I've considered going with different seats, and the driver seat is my only hesitation.
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
Very easy... just 4 bolts. You'll need a 1/2" socket and 1/4" Allen wrench. Slide the seat all way back and unscrew the front bolts. Slide the seat all the way forward and undo the rear bolts. Or do it in the reverse order. Does not matter.
Done.
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
Here are the seats that I put in mine. I'm not sure if he has any more, but PM Suprman if you are looking to purchase.
kojo0513
New member
- 136
- 0
- 0
- Location
- Dallas Texas
The front seats are easy to remove... But if you have the old drivers seat base, you will have to take out the rivets.
That's the old drivers seat base.
That's the old drivers seat base.
tage
Active member
- 679
- 68
- 28
- Location
- LOS ANGELES / CALIFORNIA
Compared to the inflation of the surplus seats on eBay, those are attractive. I have mocked up a spare kirkey racing seat and I like it. Just double the price of those ^^
- 2,186
- 86
- 48
- Location
- Zimmerman MN
I need that thermal stuff for MN winter! Spendy as **** from what I've seen.
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
I have the cold weather top stuff minus the doors but the regular doors work fine. Unless you are short you cant see out the door windows anyways they are too low.
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
Mine came from Suprman, but I got his last set of doors. Top and rear curtain are going on this weekend. Just need some pipe insulation.
ThunderSquirrel
Member
- 85
- 2
- 8
- Location
- Aurora, CO
I actually just got some of the Smittybilt Standard Buckets delivered and I am in the process of trying to get them in.
The issue that came up is the angle of the seat back. The HMMWV high back seats are nearly vertical, while the Smittybilts have an angle of recline to them. So the back of my seat hits the seatbelt reel on the b pillar and I can't get the seat far enough back.
So my question to you guys who put aftermarket seats in, what did you do with your seatbelts in your set up, or did your seats work fine with the location of the reel.
I'm brainstorming on where to relocate my reel too, but I am open to other ideas as well.
The issue that came up is the angle of the seat back. The HMMWV high back seats are nearly vertical, while the Smittybilts have an angle of recline to them. So the back of my seat hits the seatbelt reel on the b pillar and I can't get the seat far enough back.
So my question to you guys who put aftermarket seats in, what did you do with your seatbelts in your set up, or did your seats work fine with the location of the reel.
I'm brainstorming on where to relocate my reel too, but I am open to other ideas as well.