Air Govener

[Barneyszoo]

Can anyone tell me if I can replace the little rubber disk pop off on the end of the M35 air govener, or do I need the whole govener?

 

[orren]

The rubber end cap does nothing but cover the adjustment screw/nut. I had to replace the whole thing but you might get lucky and just be able to clean it inside.

Note: I had to reorder mine twice before I got a new one that worked. Typical for the junk put out these days. You could try a take-off if you feel lucky.

 

[Barneyszoo]

Thanks, but the one i'm talking about is on the end of the adjustment nut/screw, there is a small drilled hole behand this rubber disk that starts leaking when the preshure starts to get up about 20/30 psi. is there maybe something missing on mine. I'll try to get a pix and post it.

 

[doghead]

Air Governors cost about $20, buy a new one and be done with it.

 

[Barneyszoo]

Thats what I wanted to know. Where can I get a new one? Thanks.

 

[cranetruck]

Check this thread/post:
http://www.steelsoldiers.com/deuce/36059-air-governor-questions-2.html

 

[zout]

Napa will have them in stock if you have one around you

 

[doghead]

Napa H284358 (from the old site, parts cross reference list)

 

[gringeltaube]

................. there is a small drilled hole behand this rubber disk that starts leaking when the preshure starts to get up about 20/30 psi. is there maybe something missing on mine.

Maybe it helps reading this: http://www.steelsoldiers.com/deuce/36059-air-governor-questions.html

In most cases it's dirt that causes this... after a little TLC it may work again like new (plus you learn how it works!)

G.


Oops...Bjorn, you were faster once again!

 

[Barneyszoo]

doghead, is that a napa part # (H28435?

 

[doghead]

Yes


Hmmm, lesson for the day, SEARCH, The information is out there.


Pretty sure all the info we just posted here, we all searched for it to share it here!

 

[gringeltaube]

Yes, Sir!

 

[Barneyszoo]

Thanks, I'll check Mon. I have to hold the hand of the counter people at the napa by me. When I tell them its for a Jeep, thats all they hear then ask if its a CJ or Grand Wagonear or some other thing thats in the computer. So a part # will help alot.