• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Alternator Rebulit Kit

1986Blazerk5

New member
443
1
0
Location
Brighton,MI
Does anybody know of a good alternator rebuilt kid? my bearings on the drivers side alternator are going bad and i figure that i might as well rebuild the alternator, since i know how to but i have no idea where to buy the kit.

Thanks
 

mf5129

New member
120
1
0
Location
mocksville nc
the bearing may still be available from gm.press the unit apart.if you are careful it may come apart.the core value is reasonable.it might be easy to fix.
 

Stonepicker1

Well-known member
2,446
86
48
Location
Coconut Creek, Florida
I bought three kits for a total of $124 shipped, see picture.
No instruction.

DR5082HD---Rectifier
D101HD-1---Regulator
46-1100---Capacitor
39-101-3---Brush holder assy
33-102-2---Diode trio
49-1509---Battery post
6-203-4w---Ball bearing
8-101-2---Needle bearing

I have not tried to do the rebuilds yet.
 

Attachments

Barrman

Well-known member
5,274
1,796
113
Location
Giddings, Texas
Besides the Delco site, the -34 TM also walks you through the tear down, testing and putting together of an alternator. There have been several threads on this site with all the information and pictures of this job. It is really pretty easy and once you open it up, you will see how things go and probably not even open up the instructions.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Stonepicker1,
Thanks for the link. Do you know if these come a set of instructions? Also nice M1028A2!:driver:
Download the TM 9-2320-289-34 Tech Manual. Chapter 4 covers the rebuilding of the alternator. it DOES have the very important "isolated ground" instructtions that the DelcoRemy manual does not.
 

Wolf.Dose

Active member
1,062
9
38
Location
Boehl-Iggelheim, Germany
The regulator is a mass production Delco part, fitting for many altinators. The diodde plate is the 102 Amps version, which at least over here is a relativly common part, so it should be in the States. Inexpensive mass porduction of relatively low reliability. Keep parts on hand!
Wolf
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks