vitamink
Member
- 200
- 2
- 16
- Location
- Indianapolis, IN
Is that owned by the UsPalm company? I use their mags and grips...they're amazing.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
AM General to offer civilian HMMWV "kit car"
- Thread starter GoldComet6
- Start date
Heath_h49008
New member
- 1,557
- 102
- 0
- Location
- Kalamazoo/Mich
The armor world has been changing so fast in recent years to keep pace with the executive abduction industry, I would wonder if it wouldn't be lighter and maybe even cheaper to use modern civi armor rather than trying to find or copy 10 year old .mil armor kits.
Just curious considering the folks around here who are in the know on these.
Just curious considering the folks around here who are in the know on these.
- 64
- 38
- 18
- Location
- Croswell, MI
Not sure if it will even be an issue now, since it's looking like AMG isn't doing it, but I just got confirmation from the EPA..... I am inserting the email reply below....
2. An assembled kit car or complete kit car package which meets the following guidelines will be considered to be a rebuilt vehicle of a previously certified configuration and will be considered to be covered by that configuration's original EPA certificate of conformity.
So if you install and engine and related emission components from a U.S. certified vehicle into the HMMWV-C Kit, then the "Rebuilt Vehicle" would fall under that vehicles certification. So if you use the engine and emission components from a 2002 Chevrolet Silverado then it would fall under that vehicles certification as long as you used all related equipment as described in the Kit Car Policy.
Thank you,
David C. Hurlin
URS, Contractor
EPA Imports Line
Imports Group
Compliance Division
Phone: (734) 214-4100
Fax: (734) 214-4676
2000 Traverwood Drive
Ann Arbor, MI 48105
From: "Ward, Allen M JR CIV USARMY PEO CS CSS (US)"
To: Imports@EPA
Date: 03/27/2013 10:27 AM
Subject: RE: (085084417) Importing Vehicles and Engines Feedback/Questions
Mr. Hurlin,
I have read the guidance and I am confused about a possible grey are here. Essentially what I am asking is, since AM General is producing a kit made up of components that were last used in Military production, under a military EPA Waiver, would the emissions cert requirements for the assembled "Motor Vehicle" be based against the kit contents, or the used drive train I supply, as the driveline components were the only commercially produced/sold components?
Thank you for your time.
V/R,
Allen Ward
Equipment Specialist
Mine Resistant Ambush Protected (MRAP)
MaxxPro Base, MEAP, Base DXM
Plus, Plus Ambulance
COM: 586.282.4076
DSN: 786.4076
"Let us endeavor so to live that when we come to die even the undertaker will be sorry."
Mark Twain
2. An assembled kit car or complete kit car package which meets the following guidelines will be considered to be a rebuilt vehicle of a previously certified configuration and will be considered to be covered by that configuration's original EPA certificate of conformity.
So if you install and engine and related emission components from a U.S. certified vehicle into the HMMWV-C Kit, then the "Rebuilt Vehicle" would fall under that vehicles certification. So if you use the engine and emission components from a 2002 Chevrolet Silverado then it would fall under that vehicles certification as long as you used all related equipment as described in the Kit Car Policy.
Thank you,
David C. Hurlin
URS, Contractor
EPA Imports Line
Imports Group
Compliance Division
Phone: (734) 214-4100
Fax: (734) 214-4676
2000 Traverwood Drive
Ann Arbor, MI 48105
From: "Ward, Allen M JR CIV USARMY PEO CS CSS (US)"
To: Imports@EPA
Date: 03/27/2013 10:27 AM
Subject: RE: (085084417) Importing Vehicles and Engines Feedback/Questions
Mr. Hurlin,
I have read the guidance and I am confused about a possible grey are here. Essentially what I am asking is, since AM General is producing a kit made up of components that were last used in Military production, under a military EPA Waiver, would the emissions cert requirements for the assembled "Motor Vehicle" be based against the kit contents, or the used drive train I supply, as the driveline components were the only commercially produced/sold components?
Thank you for your time.
V/R,
Allen Ward
Equipment Specialist
Mine Resistant Ambush Protected (MRAP)
MaxxPro Base, MEAP, Base DXM
Plus, Plus Ambulance
COM: 586.282.4076
DSN: 786.4076
"Let us endeavor so to live that when we come to die even the undertaker will be sorry."
Mark Twain
- 4,414
- 4,207
- 113
- Location
- Brentwood, Calif
This is post is from 2013
So do u know whats the deal on hmmwv on the road cuz, wanna build one but i dont wanna get stuck with this hmmwv if i cant drive on the road
- 9,604
- 1,494
- 113
- Location
- mid- michigan
Lawdog734
Active member
- 268
- 101
- 43
- Location
- Colbert, GA
And also bone up on proper grammar. I don't know why folks choose to come to a web forum and type like it's a frigging text message......
- 9,604
- 1,494
- 113
- Location
- mid- michigan
He must have missed this in the rules he agreed to.
[
• Do not post in all CAPS or in giant run-on sentences without punctuation. Do not post as if texting and do avoid the use of texting abbreviations. We are not the grammar police but we want everyone to easily read your post in at least 8th grade English. It is extra work to post proper sentences from a smartphone but the result will be greatly appreciated. Please do your best to use capitalization, proper spelling and punctuation. It makes it easier for everyone to read! Note: this is a RULE, and is enforceable. ]
avlon01
Member
- 128
- 5
- 18
- Location
- Genoa City, WI
Check you state laws on kit cars. If you buy a kit car and assemble it, there should be a process for getting it inspected, titled, and registered.
Kit car registrations are different process from buying a surplus Humvee from gov auction. If you want one from gov auction, be aware they come marked as "off road use only". Also read the post on titling your Humvee. A link was posted in this thread.
Last edited:
saddamsnightmare
Well-known member
- 3,618
- 80
- 48
- Location
- Abilene, Texas
September 21st, 2016.
Admittedly the gentleman in post No. 48 above did manage a rather minor faux pas, but the question here is, as AM General sent an aforementioned letter to the state DMV's telling them that the HMMWV's did not met Federal Highway Safety regulations and that they should thus not be licensed, how do you figure AM General's going to get around that little issue?
Unless the drivetrain and builder plates are off the exempted old USMC tenor HMMWV's, I suspect there is going to be an issue crop up in the DMV department. Besides, for the money that they want, a solid used Unimog U1300L is a much better vehicle on and off road (IMHOP). Let's see where these chickens roost!
Admittedly the gentleman in post No. 48 above did manage a rather minor faux pas, but the question here is, as AM General sent an aforementioned letter to the state DMV's telling them that the HMMWV's did not met Federal Highway Safety regulations and that they should thus not be licensed, how do you figure AM General's going to get around that little issue?
Unless the drivetrain and builder plates are off the exempted old USMC tenor HMMWV's, I suspect there is going to be an issue crop up in the DMV department. Besides, for the money that they want, a solid used Unimog U1300L is a much better vehicle on and off road (IMHOP). Let's see where these chickens roost!