- 3,728
- 5,618
- 113
- Location
- MA
The return fuel line and the flexible lines (from the fuel filter bowl to the metering pumps) have been covered well enough. The rigid metal lines from the pump to the separator base I have never experienced a failure on... but how about the line from the backside of the separator to the fuel filter bowl? I have recently had to exchange 2 of these out. If that starts leaking (or in my case, hemorrhaging) fuel, you aren't cutting line off a spool with some radiator clamps.
This line is a make item with fittings and a length of hose (17" to be exact). I just had one fabbed up at my local NAPA for $33 with (2) 1/4" JIC female fittings and 17" of hose. Might be smart to get one for yourself in these times of part sourcing unreliability.
This line is a make item with fittings and a length of hose (17" to be exact). I just had one fabbed up at my local NAPA for $33 with (2) 1/4" JIC female fittings and 17" of hose. Might be smart to get one for yourself in these times of part sourcing unreliability.