• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Another DUKW....I just could not pass it up

RDUKW

New member
582
11
0
Location
California
Well I did It again and could not pass this DUKW up. I believe at this point I am going to do a full restoration and paint her in the Iwo Jima colors. The hull has been sandblasted and painted but will require a few rust holes welded up. I hope to try to fire the engine this week it has been rebuilt and just sitting.

Ryan
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,531
113
Location
Camp Wood/LC, TX
Wow, congrats, does that make 2 or 3 dukws for you? I find that they towbar really easily, do you agree? I can pull one with a deuce faster than it can propel itself with the 270.
 

RDUKW

New member
582
11
0
Location
California
Well I have owned 6 to date but only currently own 2 at the moment. I just pulled it around the block with the deuce and it did pull good. I need to take it to AAA this week and I'll drag it behind the m813. I also picked up a set of towing lights for a hawser that I can hang off the back.

Ryan
 

RDUKW

New member
582
11
0
Location
California
Clinto

There is a bunch of great videos there I have never seen. I even found a colorized one with some of the DUKW's painted in the Iwo Jima Camo that will be helpful for the paint job. Here is a few more shots for you.

Ryan
 

quarkz

Supreme Galactic Cleric
Steel Soldiers Supporter
805
71
28
Location
Kennewick, WA
Ryan,

Very nice rig. Some day.:drool:
Can you grab a close up pic of the tow bar connection to the DUKW shackle?
Mine was missing the shackles when I bought it and it towed like crud.
Kept trying to pass me on the way. Finally had to have it flat bedded home.
Thanx.
 

Attachments

RDUKW

New member
582
11
0
Location
California
I will go try to get a picture. I took the DUKW shackels off and machined a set of 5 ton tow bar ends to go directly to the hull. I still need to make some bushings for the ends as the DUKW has 3/4 pins and the 5 tons are 7/8.

Ryan
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
Thanks!

I think of all the MV's out there, the only one I'd want more than a DUKW is a UH-1. :D

I keep telling clintogf if I sold both my deuces, the M105 and the Mule and she sold all her deuces and the CUCV we could buy a DUKW.

That's about the time she starts rolling her eyes at me.
 

RDUKW

New member
582
11
0
Location
California
Well of the six I have had this one and my other one I currently own are the best. My other one is all original hull no rust and the paint is over 40 years old and looks great. I hope to swim that one for the first time next month.

Ryan
 

RDUKW

New member
582
11
0
Location
California
The DUKW's are still my favorite ride to. I had to buy a duece because I just about doubled the original miles on my DUKW (the one in my signature) in the first year. When I got the brakes all worked out on that on it was my daily driver for three weeks straight. You could not pry me from behind the whee. I was driving it to work, dinner, home depot and even the grocery store.

Ryan
 

quarkz

Supreme Galactic Cleric
Steel Soldiers Supporter
805
71
28
Location
Kennewick, WA
Ryan,

Thanx for the pix.
I was going to have that done at the truck stop when I had all of my DUKW towing problems but thought that would make the fingers of the toggles to thin. But now I will just get another set of 5 ton shackles and do the same.

As for the steering wheel, not quite yet. That and a couple of the other original cosmetic parts, I am going to hang on to until I need to trade for parts to make her sea worthy. But I will keep you in mind.
 

quarkz

Supreme Galactic Cleric
Steel Soldiers Supporter
805
71
28
Location
Kennewick, WA
Not that far yet,
I haven't even pulled her into the shop yet,
I am still working on my 5t bob and cab stretch project, then comes a new top for the convertible and getting my NW rally vehicle painted. Then the DUKW can see the shop.
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
I hope to try to fire the engine this week it has been rebuilt and just sitting.

Ryan

I am just bored and curious if you've had a chance to do anything with the old DUKW.
 

RDUKW

New member
582
11
0
Location
California
No I have been my own worst enemy lately. Since the last post I have added 4 more tucks to the collection. Every time a new truck shows up the others get put on the back burner. Although I am about to leave here and head to AAA to due a mass registering of trucks and one of those is the DUKW.

Ryan
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks