rebelcummins
Member
- 152
- 4
- 18
- Location
- west alexandria, Ohio
http://www.youtube.com/watch?v=bDsDofhgE6A
forward the show to 5:50...
Keep in mind i'm running 75%+more fuel rate, 4th gear on transmission and low side of transfer case, pushing 22-28 psi of boost and i engaged 6x6 3/4 of the way up the hill.1150-1200*s. All on a Small Modifacation. I was just playing with the throttle too keep EGT's Down..
New Injectors
New whistler
And a Secret (iI will not say too much at this time)
ATTN to all members you will not know its me when i roll up to the next rally, this is a top secret build. Pics will be shown later next
year. I may need some parts off some of you if you have what i need. When i'm done with the engine it will be able to withstand 30 PSI of boost and no the engine will not grenade. I cant give out all my secrets now but if you show up to the next haspin rally in Indiana ill show you, but, ill post pics as I go.
Running a LDT-465-1C, small modifacation, AKA The small secret. I will tell you this, After i get the other stuff done(the big secret)it will hold up to 30 PSI.
What im working on for it, New intake manifold that delets the after cooler, and intercooler setup. thats all im giving right now.
Project may start in 10 Days.
forward the show to 5:50...
Keep in mind i'm running 75%+more fuel rate, 4th gear on transmission and low side of transfer case, pushing 22-28 psi of boost and i engaged 6x6 3/4 of the way up the hill.1150-1200*s. All on a Small Modifacation. I was just playing with the throttle too keep EGT's Down..
New Injectors
New whistler
And a Secret (iI will not say too much at this time)
ATTN to all members you will not know its me when i roll up to the next rally, this is a top secret build. Pics will be shown later next
year. I may need some parts off some of you if you have what i need. When i'm done with the engine it will be able to withstand 30 PSI of boost and no the engine will not grenade. I cant give out all my secrets now but if you show up to the next haspin rally in Indiana ill show you, but, ill post pics as I go.
Running a LDT-465-1C, small modifacation, AKA The small secret. I will tell you this, After i get the other stuff done(the big secret)it will hold up to 30 PSI.
What im working on for it, New intake manifold that delets the after cooler, and intercooler setup. thats all im giving right now.
Project may start in 10 Days.