Any interest in winch top plates?

[deuceman51]

Anyone make the rear plate?

 

[Ridgerunner]

Wish someone would make them for the 5ton winch. Both my top plate and plate on the back side are bent outward by quite a bit.

Are the 5-ton and Deuce winch top plates the same looking, just the 5-ton is dimensionally larger?

If so, I can do them also, at the same time. I'll just need accurate dimensions to make them for a 5-ton.

 

[Ridgerunner]

I would be in for one or two for my M211 winch .............No holes just in case the winch is different than the M35 winch ...... Tim

Can anyone confirm that the M35 and M211 winch use the same top plate?

If different, what are the dimensions for the M211?

 

[Ridgerunner]

Anyone make the rear plate?

I can do the rear one also, but it would be soild, and not have the three square holes cut into it. I would serve the same purpose (maybe even stronger ?), but it would not be correct for a full on restoration.

If you really needed the square holes in the rear plate, I could Plasma cut them into it, but would prefer not to.

 

[scoutmanadam]

at that price i will difenetly take one, pm send with address for shipping price

 

[KsM715]

Are the 5-ton and Deuce winch top plates the same looking, just the 5-ton is dimensionally larger?

If so, I can do them also, at the same time. I'll just need accurate dimensions to make them for a 5-ton.

I took a quik measurment today of the top plates on both the deuce and 5 ton. I belive the deuce was something about 4-3/4 wide and the 5ton is about 5" wide and longer then the deuce. But basically the same shallow u shaped channel.

I will get some more accurate measurments tomorrow.

 

[deathrowdave]

I had a sheet fab. shop make mine a year ago or so. Used a hole saw to drill holes in the back plate and cut between the drilled holes . Worked great , wish I could have purchased them for your asking price, cost me $ 40.00 each !!

 

[hndrsonj]

Can anyone confirm that the M35 and M211 winch use the same top plate?

If different, what are the dimensions for the M211?

Same winch.

 

[F18hornetM]

Here is the top plate I made for mine. I have no idea if accurate as couldnt really find a great close up picture. Not a huge deal to make but thats a good price for a new one considering material and time.

 

[bede63]

$24 sounds OK, I'll take one! Please PM me.


Deuceman51: Memphis Equipment has rear plates, at least back in 2009.


Regards,
Charles Schneider
Raynham MA

 

[Ridgerunner]

Today so far I sheared up and formed, 12 winch top plates and 7 rear winch plates for Deuces. If anyone wants any of these right away, I can send them out on this coming Monday (Oct 10) without any mounting holes, if you want to put them in yourself.

or...

If your not in a hurry, I don't work Fridays, and that's the day that I do my own side stuff in my shop. So I'll make a layout transfer punch jig and finish machining the mounting holes then, and can send the plates out after that process.


Send me a PM if your interested in front or back winch plates, and with or without holes.

thanks

 

[73m819]

This is what makes the USA so great, someone found a need and filled it, another SMALL BUSNESS is started

 

[F18hornetM]

Looks nice, what gauge did you make them out of? I had a spare sheet of 10 ga when I made mine, but wasnt sure what thickness it was supposed to be.

 

[m16ty]

PM sent.

 

[Recovry4x4]

Pretty sure the original was 11GA.

 

[gringeltaube]

Pretty sure the original was 11GA.

11ga = 3mm, that's what I use. Most of what I have replaced was only 12ga (under several layers of paint...!)

G.

 

[Ridgerunner]

Looks nice, what gauge did you make them out of?

These are made from 11 gauge material.

 

[nk14zp]

Yes, I was going to make them like the standard winch plate. I don't know why the plate on my bobber has the ends trimmed off like it does. Never seen another like it before.

Ours on the wifes bobbed deuce has the ends trimmed off the same way.

 

[Ridgerunner]

All the top plates are finished. All sharp edges are now sanded down and the mounting holes are machined. I can package them up and ship them out on Monday.

 

[anthonyamato4]

Sending a pm...hoping you may still have some