- 14,607
- 4,695
- 113
- Location
- Buchanan, GA
You can view the page at http://www.steelsoldiers.com/content.php?4-MEP-WIKI
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I am new here. I have a MEP-002A my generator only has 2 electric pumps and 1 injector pump on side of motor mechanical pump But I think the MEP-002A and MEP-003A are the same electric fuel pumps. I would check for 24 volts at the pump that is not running. The aux.pump just pumps fuel from aux fuel tank to the on board fuel tank on board has a float in it that turns aux pump on and offJust purchased a MEP-003A and I think the fuel pumps are bad. Well I think two of the three are bad. Question, does all three pumps have to be working to make the generator start? I know the aux. pump is working. I purchase a pump from the auto parts store which is 24 volts and I have 24 volts coming to it. But not coming out I grounded it and still not coming out. I need some help with this. Is there any fuses in the lines for the pumps?
Thanks
was hoping for a suggestion...I ended up with a fuel rated well nut that did the trickSo................ What can we help you with?
I would start your own thread. Where you are now, is not going to bring you any help.Ok I have a question about an 002a generator I just bought, it cracked and every thing worked as it should and I was testing the out put lugs and hit l1 and l3 it made a small spark and now it's not producing any thang . So what did I do to it.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!