• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Axle (s) rebuild thread, gears and lockers

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,081
5,315
113
Location
Portland, OR
Used to use that a lot. It's AWEFUL to clean up if you ever have to go back in there. I personally use The Right Stuff black. It's a "1 minute RTV silicone." Works amazing on SBC china walls.....



Hylomar would be another interesting choice. Also requires a special solvent but it's reusable. It's like the sealant equivalent of velcro.



 

aw113sgte

Well-known member
Steel Soldiers Supporter
692
1,058
93
Location
La Crosse, WI

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
Anyone know how the ABS sensor comes out? Maybe I need to look harder but I don’t see a screw on mine.


Sent from my iPhone using Tapatalk
 

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
ABS sensor popped right out. I had to use a small screw driver to get the first 1/8 to move. Also had to use a small pry bar on the brake shoe to get the last 1/8 to clear.


Sent from my iPhone using Tapatalk
 

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
After about an hour of trying, failed to get the front in. It keeps hitting something and I cannot figure out what. Gonna clean the rtv off in the morning and try again.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks