BII on M-116 Trailer w/ MEP-003A GenSet

[steelandcanvas]

I'm looking for photos or a description of the BII on the trailer (M116) for the MEP-003A GenSet. I went through some TMs but couldn't find what I wanted.

 

[319]

Appendix B of TM 5-6115-632-14&P any help?

 

[steelandcanvas]

Bump...don't want to lose this.

 

[m38inmaine]

8lb sledge hammer, 2ea ground rods, slide hammer, fire ext(BII), and manual(BII). Last two items are the BII, others are in the accy. box.

 

[steelandcanvas]

8lb sledge hammer, 2ea ground rods, slide hammer, fire ext(BII), and manual(BII). Last two items are the BII, others are in the accy. box.

Thanks Mark, That's a start. But what are all the mounts on the trailer for?

 

[gunboy1656]

Those are for an antenna (9M or 15 meter). the set came from a signal unit. Pulled many of those.

The 3rd pic is for your ground strap.

The tie points at the back are for the 2 part power cord.

 

[steelandcanvas]

Thanks Scott, So the 6 sided clamp is for an antenna, is really not needed if I don't plan on using it to support a signal unit. The other straps are for ground and power cabling, so I'll leave those intact. I'd like to re-mount the Genset in my M105A2 trailer and use the M116 for my ATV and lightweight hauling. The 105 lines up with the Deuce, better than the 116. The 116 lines up real nice with my Dodge Cummins Dually, so I figured a transplant was a good idea.