JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
Yes it slips thru the Head Light hole while bent a little till it go across the Turn Light. Then it just pops into the head light hole to stay there.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bought new LED Head Lights to put on?
- Thread starter JD4044M
- Start date
- 7,771
- 19,879
- 113
- Location
- Charlotte NC
.
Wish I had a definite answer. Trucklite seems to be their default on a lot of LED's.
Best answer might be to unscrew those three screws on the trim-ring and see if there is a part number on the light - Maybe?
The heated lights that I have (not my headlights) appear to have a heat sink on the back of the bulb housing - made by TruckLite.
My buddy has them on his 800 series dumptruck and they are brite as the sun but its a blueish white lite theyre 20 times brighter than my projector jw lights for sure !
SWEET!!
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
No but i will ask ! But you do live in Austin not the real snow belt of I-80/90 !
Third From Texas
Well-known member
- 2,777
- 6,529
- 113
- Location
- Corpus Christi Texas
I've seen those on plenty of HMMVWs
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
Thanks….. didn’t you see the snow storm we got this year?
Actually, I do plan to go to the snow and ice at some point….. so I do want it to be an all season/weather truck.
Sent from my iPhone using Tapatalk
I hear ya ! and the lights on his truck were not heated !
Doug,
I can't tell by looking at the picture, but if you look closely at the front lens, you should be able to see very fine wires (like a rear window defroster) applied to it. The heating is done by current flowed through the wire matrix just like the rear window version. The wires are readily visible if you have them. Mine do, but I'm away right now and can't take a pic for you. Mine are different models, but the idea would be the same.
Chris
- 1,813
- 1,519
- 113
- Location
- Orlando, FL
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
I want mine to be a Fire Fighting Rig at this point. Just put another 250 Gal Tank on the back now have 700 gallons total or 5,600 lbs of water to work with. Pump one dry go to the other. I can keep one real full for travel this way transferring water. No sag in the Bed I can see lots of room on the over load bumpers too. Set up my Boom in a way I can easily add a 1" Sprinkler Cannon on it 13 ft off the ground to wet down a large area. I will be testing it today coming in the mail soon. Just might rip near here today there issuing lots of Evac Notices near us. Boom worked great to load the Tank in the back by myself. 50+ Feet out from the truck 100+ Ft Full Circle happy with it. Easy to remove to and fold the boom away.
Last edited: