• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Broken stud

Mk23

Active member
Steel Soldiers Supporter
124
81
28
Location
Port Angeles, WA
So I went to service the bearings on my Drash trailer unit, and wouldn't you know it, first wheel nut I touched, it sheared straight off. I salvaged all the other ones by using heat first and a thread tap to clean up the thread.

Now I need a new stud though. They appear to be longer than the Hmmwv ones I had on hand. Those were about 1 5/8 and the Drash ones were about 2 1/4".

Does anyone know, do they look similar to the m1102 ones?

Could please point me at a source?20210423_163730.jpg20210423_163734.jpg20210423_204358.jpg
 

Lothar

Well-known member
324
661
93
Location
North Arkansas
I think you might find what you need here
Just got to get the measurements right. Good luck
 

Coug

Well-known member
Steel Soldiers Supporter
2,975
4,356
113
Location
Olympia/WA
If not NAPA then maybe try Les Schwab, as they should have all sorts of replacement studs
 
Top