• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Broken stud

Mk23

Active member
Steel Soldiers Supporter
124
81
28
Location
Port Angeles, WA
So I went to service the bearings on my Drash trailer unit, and wouldn't you know it, first wheel nut I touched, it sheared straight off. I salvaged all the other ones by using heat first and a thread tap to clean up the thread.

Now I need a new stud though. They appear to be longer than the Hmmwv ones I had on hand. Those were about 1 5/8 and the Drash ones were about 2 1/4".

Does anyone know, do they look similar to the m1102 ones?

Could please point me at a source?20210423_163730.jpg20210423_163734.jpg20210423_204358.jpg
 

Lothar

Well-known member
324
661
93
Location
North Arkansas
I think you might find what you need here
Just got to get the measurements right. Good luck
 

Coug

Well-known member
Steel Soldiers Supporter
3,003
4,420
113
Location
Olympia/WA
If not NAPA then maybe try Les Schwab, as they should have all sorts of replacement studs
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks