- 414
- 892
- 93
- Location
- Daytona, FL
mine is leaking at the arm...is there a rebuild kit ?. is it necessary for the well being of the Free World?....can it be plugged/bypassed?.. thoughts?
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cab load sensor valve rebuildable ?
- Thread starter BERZERKER888
- Start date
- 2,672
- 2,220
- 113
- Location
- Sunman Indiana
I would think any cheap leveling valve could be easily adapted to take its place.
- 414
- 892
- 93
- Location
- Daytona, FL
I just may plug it because the air bags need replacing as well..
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
Take it apart slowly (incase of springs) and see if any O rings are in there..... get back with us on what you find.... appreciate it in advance
- 414
- 892
- 93
- Location
- Daytona, FL
that's on tomorrow's schedule....
- 414
- 892
- 93
- Location
- Daytona, FL
i would imagine the principles are essentially the same…
- 414
- 892
- 93
- Location
- Daytona, FL
just may work…
- 414
- 892
- 93
- Location
- Daytona, FL
Ugh..$200 and $185 (used) from “that” outfit In Missouri
Commercial ones can be 80 to $200 depending on brand. You get what you pay for. You aren't driving a 1990s Ford ranger. It is a truck built for the military and only them with no civilian equal so parts aren't that common or they will be a little more.
There is one on the auction site with make an offer.
However, the video seems to show that it could be easily rebuilt with a few O-rings...seems to be the cheaper way!
Good luck!
- 414
- 892
- 93
- Location
- Daytona, FL
and that's exactly my Labor day Sunday task..if it cannot be rebuilt...I'll give Bryce a call..he has done me real good on used parts...There is one on the auction site with make an offer.
However, the video seems to show that it could be easily rebuilt with a few O-rings...seems to be the cheaper way!
Good luck!
- 414
- 892
- 93
- Location
- Daytona, FL
Attachments
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
SWEEET..... let us know what specs you find on the O-rings
- 414
- 892
- 93
- Location
- Daytona, FL
harbor freight blue box...the largest o ring which is sandwiched between the 2 'halves' was fine .
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
interesting.... the blue box is Metric. Was that just the box you had? Or did you have both metric and sae... but found a metric was closest match?
- 414
- 892
- 93
- Location
- Daytona, FL
had both red and the blue box...
11mm nuts and 3/16 allen wrench...go figure
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
might be all metric. Apparently 3/6th allen is 5mm metric. curious if the threads are metric.
So not to assume.... since you had both metric and sae boxes.... you then compared rings from both boxes and found the metric to be closest match?
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
if anyone cares... for future reference
-Harberfreight vs others
-Oring and chemical compatibility
www.marcorubber.com
-How to measure Orings
-Harberfreight vs others
-Oring and chemical compatibility
O-Ring Chemical Compatibility Chart Rubber Resistance Guide
Marco Rubber offers an extensive o-ring chemical compatibility chart to compare how different chemicals and o-ring materials perform together
-How to measure Orings
- 7,771
- 19,879
- 113
- Location
- Charlotte NC
.if anyone cares... for future reference
-Harberfreight vs others
-Oring and chemical compatibility
O-Ring Chemical Compatibility Chart Rubber Resistance Guide
Marco Rubber offers an extensive o-ring chemical compatibility chart to compare how different chemicals and o-ring materials perform together
-How to measure Orings
Almost makes me "special" to have a real o-ring gauge I guess.
One of those things that sits there in my toolbox most of the time - but it sure is nice when you "just need to know" .
Of course that and a nickle won't buy you a cup of coffee.
