This was my first answer to adding a camper. Only time will tell if it's the last. I used plates on the trailer wheel hubs to lower and attach it to the bed. It uses the trailer suspension there and is hinge bolted at the front. It takes about a half hour to disconnect and remove it. The tongue is shortened and can have the removed portion added back for towing the camper. The front slide out bed is replaced with a canvas wall. I am able to set it up by myself from the ground and inside except for attaching the elastic cords under the bed slide out. That requires a short step ladder.
I hope to finish the brushguards, decks and stairway this spring.
If it holds up it's a great way to go: King bed, dinette bed, heat, a/c, stove, oven, fridge, ref/freezer, toilet/shower.
Dane
View attachment 719817