Rustyshackelford
Member
- 478
- 13
- 18
- Location
- Tucson AZ
Hi,
Heading out for the big trip tomorrow and the M1009 wont start.
I've been reading wiring diagrams and diagnosing all day and I can get it fixed so I'm asking for help please.
We have two good batteries
WE have a good starter
We have a good starter relay
We have good fusible links
We have 24v at the big wire on the starter
We do NOT have power to the little wire on the starter when key turned
We do NOT have power to the 24v 10a fuse
We do NOT have power to the Gen 2 light
We do NOT have power to the starter relay (it clicks but nothing comes in or goes out)
See attached wiring diagram.
We have power to RED 2Y wire leaving the bus bar
We do not have power where RED 2Y wire meets starter relay or branches off to fuse box.
HELP!!
Heading out for the big trip tomorrow and the M1009 wont start.
I've been reading wiring diagrams and diagnosing all day and I can get it fixed so I'm asking for help please.
We have two good batteries
WE have a good starter
We have a good starter relay
We have good fusible links
We have 24v at the big wire on the starter
We do NOT have power to the little wire on the starter when key turned
We do NOT have power to the 24v 10a fuse
We do NOT have power to the Gen 2 light
We do NOT have power to the starter relay (it clicks but nothing comes in or goes out)
See attached wiring diagram.
We have power to RED 2Y wire leaving the bus bar
We do not have power where RED 2Y wire meets starter relay or branches off to fuse box.
HELP!!