• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Case M4k TM

kleinertn17

New member
12
5
3
Location
North Carolina (NC)
Hello I am looking for the service TM for the Case M4k forklift. Any help would greatly be appreciated.
This is the TM number I am looking for, -24P is all of the internet but that is just the parts TM not service TM.
TM-10-3930-638-24
 

Guyfang

Moderator
Staff member
Moderator
16,766
24,079
113
Location
Burgkunstadt, Germany
As I wrote this morning, I will clean up this thread. All of us were to lazy to look in the TM Forum. Below is the link.


Hello I am looking for the service TM for the Case M4k forklift. Any help would greatly be appreciated.
This is the TM number I am looking for, -24P is all of the internet but that is just the parts TM not service TM.
TM-10-3930-638-24



 

kleinertn17

New member
12
5
3
Location
North Carolina (NC)
Hey Guyfang, thanks for making the link. I did however take the time to look through the TM forum and found these TMs that you had posted. However, as stated in the original post I am on the hunt for the TM service manual without the -24P suffix. See why I think this gets confusing is, the M4K was first manufactured with a Case diesel engine, (that is the TMs you have provided) Then it was updated to being built with a Cummins 3.9 B series engine, and a update TM was released to cover this version of the M4k or M4kn (notice the asterisk in picture below). That is the TM that I am looking for. Below is the TM that I am hunting. I do appreciate everyone's help with trying to solve this.

1731957530360.png
 

Guyfang

Moderator
Staff member
Moderator
16,766
24,079
113
Location
Burgkunstadt, Germany
NDT wrote:
Can we put these in the TM section please?

I put this TM in the TM forum, before I posted here in this thread, so long done.

Kleinertn17 Wrote:
Must have been down there with the Titan submersible lol. I thought I was half decent at locating items on the net, but this one defiantly eluded me. Any advice on go to places to source manuals?

I looked through 25 pages of the search results, "TM 10-3930-638-24, 2008". The date was the KEY. In your first post, had I known the date, it would have come up sooner. Searching just for TM 10-3930-638-24, will always turn up the results that are listed MOST OFTEN. That means you have to sift through a LOT of results. I do speed read well.

A good way to start is Search: "TM 10-3930-638-" But it brings up a LOT of results.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks