CDR Hose

[O.D. Fever]

I have searched until I am blue in the face. I need the rubber hose that goes to the bottom of the CDR valve part # 14050446. I searcher the part number and came up with nothing. I found an old thread and that poor guy also came up empty. Mine is ripped wide open and my rear main is leaking. I will put a new main in after I find the part and it still leaks. Any help would be great. Thanks Joe

 

[ralbelt]

This one

 

[O.D. Fever]

Yes thats the CDR, I need the hose on the bottom, the one you can't see. It takes the two tubes from the intake and joins them to one for the valve.A Y hose.

 

[EODTECH90]

i got all that stuff lying around, pm me i have like 2 of them and also that entire assembly

 

[wired1000]

Is that a spark plug stuck in the lower opening of that CDR hose???

 

[jdeoliveira74]

sure does look like a spark plug

 

[ralbelt]

Yes its a spark plug, I have an open plane intake manifold and it only uses 1 breather pipe from the CDR, a spark plug is the perfect size to seal the second hole, Plus it keeps you guys on you toes, eventually I'll attach a coil up to it to really mess with you.

 

[O.D. Fever]

It might blow the lid off the motor if you gave it spark.

 

[EODTECH90]

put a coil to it....for the sheer confusion ensued

 

[Cucvnut]

why do you run a single plane manifold?

 

[EODTECH90]

what is a single plane manifold

 

[EODTECH90]

 

[Cucvnut]

Performance Intake Manifolds

This explains the diffidence.

 

[EODTECH90]

Performance Intake Manifolds

This explains the diffidence.

thanks man

 

[m38inmaine]

I just swapped in a 6.2 from a van and it had the single plane manifold and a single hose cdr valve.

 

[ODdave]

Yes thats the CDR, I need the hose on the bottom, the one you can't see. It takes the two tubes from the intake and joins them to one for the valve.A Y hose.

Did you find the hose yet? I can look today and see if I have one if you still need it. Headded out tthere in a lil bit.