pigpen60
Active member
- 681
- 127
- 43
- Location
- foley/missouri
Does anyone know where I can find the center of gravity for a m1008? I saw it somewhere but I cannot find it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
center of Gravity m1008
- Thread starter pigpen60
- Start date
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
Do you have the nomenclature on the inside of the drivers door?
Skinny
Well-known member
- 2,130
- 488
- 83
- Location
- Portsmouth, NH
Look under the transfercase, it should be there somewhere. It is usually a yellow and black circle, tought to spot unless you slide under the truck...
pigpen60
Active member
- 681
- 127
- 43
- Location
- foley/missouri
Door tag! I knew id seen it somewhere.
Hey skinny, I looked where you told me to but no luck.
Hey skinny, I looked where you told me to but no luck.
Skinny
Well-known member
- 2,130
- 488
- 83
- Location
- Portsmouth, NH
Maybe the previous owner removed it 
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Here you go maybe this will help.
Attachments
pigpen60
Active member
- 681
- 127
- 43
- Location
- foley/missouri
Thank you.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
May I ask why you need to know where the center of gravity is on your truck??
roveroverme
Banned
- 350
- 0
- 0
- Location
- port saint lucie/ florida
It's good to know it for the dramatic 'hanging over the bridge' or cliff scenes.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Alrighty I can go along with that.
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I disassembled many CUCV's of different variants and have never seen any Center of Gravity mark painted on any off them. Are you being serious? Why would they paint it on?
pigpen60
Active member
- 681
- 127
- 43
- Location
- foley/missouri
Skinny is being funny. I picked up an m1008 I purchased from GSA, when I picked it up I had it too far forward on the trailer. So this weekend I'm hauling a gasser k20 to my sons place and wanted to load it better. I realize it's not the same as the m1008 but it's close enough.