nyoffroad
Well-known member
- 936
- 674
- 93
- Location
- Rochester NY
I'd use paint stripper, apply to one panel and then cover with plastic. While thats sitting place scrap sheets of cardboard under it to catch drips and spray/brush a second panel and cover then go back to the first and scrap the gunk off using a plastic body filler spreader. Keep one panel 'soaking while scraping another, after scraping use a red 3M scotbrite pad and paint thinner to clean the residue off. To keep the stripper from getting in jambs tape over the jambs with masking tape and then sand that area down. THIS WILL CLEAN ALL THE PAINT AND PRIMER OFF! RUST WILL START IN QUICKLY PLAN ON SOME KIND OF PRIMER AND USE IT THAT DAY