Can anyone help me drawing a circuit? I want to use an M939 Heater switch (or a like switch w/ same dimensional characteristics) to power HIGH and LOW beams on a pair of Armored Lights. Below are the lights and switch. The bulb inside is a GE4811. CLICK HERE for a partial schematic. I believe this switch was originally set up so it would send 12V to the heater blower motor for low, and 24V for high. Is it possible to do what I want to do w/ this switch? I have a panel made for these types of switches.? If anyone can draw me a safe, clear circuit I would be happy to send lunch money, w/ a few beer dabloons as well! I believe I see how to do this using 2 switchs, by switching on switch #1 and then switch on switch #2 but I need to try to do this w/ one switch.
![irlight-switch.jpg irlight-switch.jpg](https://www.steelsoldiers.com/data/attachments/307/307339-dc9f3af9c4b31ce736b095195010a3ec.jpg)
![irlight.jpg irlight.jpg](https://www.steelsoldiers.com/data/attachments/307/307335-ff7c370ca42bae5d14c13a27dcb770b9.jpg)
![irlight-switch.jpg irlight-switch.jpg](https://www.steelsoldiers.com/data/attachments/307/307339-dc9f3af9c4b31ce736b095195010a3ec.jpg)