• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Clicking after Start

M1009 Fiend

New member
213
0
0
Location
Costa Mesa/Corona, Ca
Im sure i read about this somewhere but can someone help. After the my m1009 turns over i get a clicking for about 15 seconds and it sounds like it is coming from behind the dash.

Is this normal? Or do I need to replace something?

Any Help welcome thanks.
 

Buckmaw

Member
170
0
16
Location
Round Rock, Texas
When the motor is cold, the truck does a "afterglow" cycle on the glow plugs until things warm up a bit.

It sounds like a solenoid click ~ 5 to 7 seconds ~ click again, correct?

Then it repeats in 15 - 20 seconds...
 

M1009 Fiend

New member
213
0
0
Location
Costa Mesa/Corona, Ca
No its not just when its cold and it is a consistent clicking.

And its parked and moving right, after i start the 1009, idk nothing lit up and once i got home stopped turned her off and then started again the same clicking....:?:
 
Top