bighoss0331
New member
- 14
- 0
- 0
- Location
- tn
hello gentlemen.i need a little held with my m1008.its my work/play truck and ive been thingen of maken it a dually.what do yall think
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
convert a srw to a dually
- Thread starter bighoss0331
- Start date
Cucvnut
Well-known member
- 3,804
- 61
- 48
- Location
- Carver, Oregon
why ? do you need a Dually ?
ODdave
New member
- 3,213
- 41
- 0
- Location
- lansing michigan
need a dana 70 rear axle and some new front hubs. techinicaly you should have the "double stack" rear springs and frame bumps as well
wreckerman893
Possum Connoisseur
- 15,629
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
Are you going to keep the stock bed......without the "thunder thighs" fenders it will look goofy.
You might consider a flatbed...then you can have stacks. Nothing says big truck like stacks.
You might consider a flatbed...then you can have stacks. Nothing says big truck like stacks.
67_C-30
New member
- 645
- 3
- 0
- Location
- Sweet Home Alabama!
67_C-30
New member
- 645
- 3
- 0
- Location
- Sweet Home Alabama!
Oh, and trucks too!
Attachments
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
Chubby Chaser?Me likes 'em with big hips!!!
You could use a cab and chassis axle and use a stock bed. I have seen that before.
- 10,865
- 762
- 113
- Location
- Appomattox, VA
You can definitely haul your two tons of buns around in a dually.
67_C-30
New member
- 645
- 3
- 0
- Location
- Sweet Home Alabama!
Big girls try harder - PLUS - I'm a big 'ol boy. Wouldn't want to break one of them skinny'uns!
bighoss0331
New member
- 14
- 0
- 0
- Location
- tn
i have 2 duallys.the one i do the most towing with is a chevy k30 with a caddy 500.i haul a tool box and 100 gallon plus diesel tank in the m1008.i was thinken about a flatbed or mabe fenders.i dont like single wheels be hide me.
bighoss0331
New member
- 14
- 0
- 0
- Location
- tn
another thing,the exhaust.what size pipe shoul i run.i have a single 3 inch coming out in frount of the passnger rear tire
- 34,012
- 1,808
- 113
- Location
- GA Mountains
The easiest way to convert one is with a parts truck. I can almost guarantee you will have to regear the dana 70 or take the 4.56s out of the front. The rear axle and stuff from a 2WD will work too. Not a difficult job. Of course there is the spacer route for the back but it''s cheezy. Shop on pirate 4x4 for someone wanting to trade dually hubs for singles.
87k5
New member
- 26
- 0
- 1
- Location
- Columbia SC
I am
I am converting my m1008 to an m1028a2 soon, I have sourced a bed with dually fenders, a dana 70 drw axle, and dana 60 with drw hubs (I got got the whole axle because it was a good deal. I am not using my dana 70 because I bought an 14 bolt with the 60 for a good price. They are geared to 411 gears. I also have the m1028 springs.
People ask why I am doing the conversion and the best answer i can come up with is....... because I want to.
I am converting my m1008 to an m1028a2 soon, I have sourced a bed with dually fenders, a dana 70 drw axle, and dana 60 with drw hubs (I got got the whole axle because it was a good deal. I am not using my dana 70 because I bought an 14 bolt with the 60 for a good price. They are geared to 411 gears. I also have the m1028 springs.
People ask why I am doing the conversion and the best answer i can come up with is....... because I want to.
67_C-30
New member
- 645
- 3
- 0
- Location
- Sweet Home Alabama!
Good answer! I'll use that in regards to my converted dually!
Attachments
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
how are you using a 14 bolt with dually rims? wont it be too narrow for that bed"
BiggHoss I have dually hubs and rear axles if you want to trade?????
87k5
New member
- 26
- 0
- 1
- Location
- Columbia SC
The 14 bolt and d60 i got were from a mid 80's dually chevrolet.
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
That would have been a cab and Chassis. ( narrow dually) to make it look right (oem) to fill out the fenders you need the Dana 70.
67_C-30
New member
- 645
- 3
- 0
- Location
- Sweet Home Alabama!
The later dually pickups used 14 bolts instead a Dana 70. That's what I have under my '67 C-30. There are 3 different width 14 bolt FF rears - SRW, cab and chassis dually, and Dually pickup/short bus.
ODdave
New member
- 3,213
- 41
- 0
- Location
- lansing michigan
Yea and the 90's body style are hard to find and expensive up here. The 80's body style are to narrow to use on a box as previously stated
bighoss0331
New member
- 14
- 0
- 0
- Location
- tn
what about a larger brum for the rear axle.i may just say to **** with the whole thing and drop my caddy 472 in it and have a pure play truck