• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Convert the M1165 to a Slant Back

Gamble

Gamble

Well-known member
380
308
63
Location
Los Angeles, CA
Is it feasible to simply add a slant back roof and pontoons from a M1045A2 or an M1046 and add it to an M1165? Are there any differences in pillars or windshield etc. Will it all align? Is this even worth attempting. Should I simply try to acquire a stock slant back?
 
  • Like
Reactions: cwc
Retiredwarhorses

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,261
3,872
113
Location
Brentwood, Calif
Gamble said:
Thanks. My concern was that the 1100 series is, I believe, 1 foot longer than the 1045. I didnt know if the slant back would reach the end of the truck or if it would be a few inches short on the back truck gate.
Click to expand...
no, the m1114 is a different roof, m1151 is aluminum. All the bodys are the same body...nothing is longer or shorter
 
Retiredwarhorses

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,261
3,872
113
Location
Brentwood, Calif
On top of the roof, you will need everything to support the roof, and you will need to install a turret or close out plug.
i have the correct turret with hand cranks and heavy bearing for the m11XX series trucks.
 
Gamble

Gamble

Well-known member
380
308
63
Location
Los Angeles, CA
Retiredwarhorses said:
On top of the roof, you will need everything to support the roof, and you will need to install a turret or close out plug.
i have the correct turret with hand cranks and heavy bearing for the m11XX series trucks.
Click to expand...
I assume you mean the pillars to support the roof. I believe that would be the C Pillar (Third cross bar - Last one on the back. Closest to the trunk). Hopefully, I could find a roof without a turret hole cut in it. As for the hardware for the slant back, do you know a price point for that?
 
You must log in or register to reply here.
108,364members
163,668threads
2,302,854posts
779online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks