- 568
- 404
- 63
- Location
- Jupiter/FL
Anyone have a supplier for cowl hardware,
pegs. number 7 in picture
Sent from my SM-G975U using Tapatalk
pegs. number 7 in picture
Sent from my SM-G975U using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cowl hardware
- Thread starter jcollings
- Start date
Jeepadict
Well-known member
- 500
- 781
- 93
- Location
- Round Mountain, NV
Since you're in the TM, you can copy/paste the P/N & NSN into Google if you want new stuff if it's out there. Realistically, those are normal GM things that can be had from any 80s Squarebody pickup in a pick-a-parts yard, or from the vintage catalog companies like Brothers, Classic Industries, or LMC.
Sent from my SM-G970U using Tapatalk
Sent from my SM-G970U using Tapatalk
- 568
- 404
- 63
- Location
- Jupiter/FL
Thanks for the info, LMC is a no go.
In the TM the pic I listed, the following page Usually Has part numbers for numbers depicted.
But sometimes in this case there were no part numbers associated. Anyway HB hook me up with some used stuff that will do.
Thanks again for the reply.
Be safe
Sent from my SM-G975U using Tapatalk
In the TM the pic I listed, the following page Usually Has part numbers for numbers depicted.
But sometimes in this case there were no part numbers associated. Anyway HB hook me up with some used stuff that will do.
Thanks again for the reply.
Be safe
Sent from my SM-G975U using Tapatalk
- 17,491
- 25,872
- 113
- Location
- Burgkunstadt, Germany
What TM did you use?
cucvrus
Well-known member
- 11,475
- 10,467
- 113
- Location
- Jonestown Pennsylvania
I probably have 12 of the cowls in my barn. I am sure I have them parts you need. Used. I have a Genuine GM cowl brand new unused. I bought it back in the 90's and never used it because it is galvanized, and I didn't want to spend the time prepping it for paint. I used a civilian one and it all worked out. Take Care.