- 1,845
- 51
- 48
- Location
- Berkeley CA
If you have a cargo cover installed on your M1008
could you please take a look at the metal stip with the turnbuttons on it that attaches to the top outboard side of the tailgate.
The metal strip is aprox 1 1/2 " wide and as long as the tailgate. However it is bent slightly in the middle along the major axis.
My question is: Does the bend bend toward the front of the truck or toward the rear?
Front \ Rear
or |
front / rear
|
Note: vertical bar is supposed to be under the slashes to represent the other half of the metal strip.
I am about to mount the turnbuttons on and want to make sure they point in the right direction.
Thanks!
Bruce
could you please take a look at the metal stip with the turnbuttons on it that attaches to the top outboard side of the tailgate.
The metal strip is aprox 1 1/2 " wide and as long as the tailgate. However it is bent slightly in the middle along the major axis.
My question is: Does the bend bend toward the front of the truck or toward the rear?
Front \ Rear
or |
front / rear
|
Note: vertical bar is supposed to be under the slashes to represent the other half of the metal strip.
I am about to mount the turnbuttons on and want to make sure they point in the right direction.
Thanks!
Bruce
Last edited: