CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Good lord.
Where did you go?
Videos?
Where did you go?
Videos?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Front Winch Mount
- Thread starter dmilkman589
- Start date
dmilkman589
Member
- 181
- 1
- 18
- Location
- troy, ny
I tried driving through a swamp... No videos haha.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Did you have to get winched?
Go back through and make a video
Please
Go back through and make a video
Please
K9Vic
Active member
- 1,261
- 7
- 38
- Location
- Fort Worth, TX
Going wheeling/mudding what ever you want to call it you will always see my winch mounted. If it is covered it will not be an issue with mud and will be usable right away, been there many times. I am not going to try to carry a 120lb winch from where ever I have it stored to the front of my CUCV in a mud hole, not worth my safety of falling. The reason to make it removable is to prevent theft or flat towing with a tow bar. There are many ways to lock it down, a good chain and pad lock to an eye link on the plate, or just wrap it around it. You can also weld a small curved plate to block one of the bolts on the winch (See video). This is for the fools that do not know the plate is removable, but if you do not secure one of the bolts they can just unbolt it.
Do not get me wrong, I like this idea and it looks great and will be good for people that do not have tools to build them. But I almost never take mine off and just leave it covered.
https://www.youtube.com/watch?v=WvcGsUVyBnI
Do not get me wrong, I like this idea and it looks great and will be good for people that do not have tools to build them. But I almost never take mine off and just leave it covered.
https://www.youtube.com/watch?v=WvcGsUVyBnI
Drock
New member
- 1,020
- 12
- 0
- Location
- Eatonton GA
Good idea, all though I would have just welded ah bolt. Just buy 5 bolts when your at the store and stick one in a marked sandwich bag, and throw it in the glove box. Or better yet drill an another hole in the plate for the extra bolt with ah nut on the other end.
Randyw
Member
- 101
- 6
- 18
- Location
- Bridge City Tx.
Any word on the completion of these mounts? I am really interested in one for my M1008.
662nelms
New member
- 8
- 0
- 0
- Location
- Corinth, MS
I want one of these if you have started selling them.
Realbryanrule
New member
- 6
- 0
- 1
- Location
- GA
Any action on this build for sale? I just picked up a warn #18 would be glad to test the design.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Colorful use of adjectives. I like it and agree with the video host.
Truckyea
New member
- 117
- 0
- 0
- Location
- Elyria Ohio
Bump
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
corelokt
Member
- 859
- 2
- 16
- Location
- Duffield, VA. (East of nowhere).
On my tractor I used a 2" receiver front and rear for my mile marker hydraulic winch. It was swappable to where ever I needed it for skidding logs or getting out mud holes and bogs. A truck would be the same.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
This is the bumper set up I built. It's 10 inch channel with a 1/2x8 flate behind it all the way across. 10k champion winch, I welded it to the stock shackle mounts
richingalveston
Well-known member
- 1,715
- 120
- 63
- Location
- galveston/Texas
here is my mount. I need a new winch. The one shown here is a boat anchor.
with the clip off, you can see the receiver part that goes behind the bumper. I am going to try and mount the new winch on it behind the bumper
may have to do some work to the core support.
with the clip off, you can see the receiver part that goes behind the bumper. I am going to try and mount the new winch on it behind the bumper
may have to do some work to the core support.
Attachments
Glockfan
Member
- 274
- 16
- 18
- Location
- Brigham City, Utah
Here's a couple of pics of my winch. My buddy Joe and his guys modified the front brush guard slightly and we ended up getting a 12,000 pound Mile Marker hydraulic HMMWV winch to work perfectly on my M1031.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Hey Glock.
That sure is a good looking truck. How did you get hydrolic power to run it?
That sure is a good looking truck. How did you get hydrolic power to run it?
Glockfan
Member
- 274
- 16
- 18
- Location
- Brigham City, Utah
Runs off of the power steering pump. Makes full power when the engine is at idle...
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
How did you do that? Thanks
Glockfan
Member
- 274
- 16
- 18
- Location
- Brigham City, Utah
it just becomes a part of the power steering/hydroboost circuit... too easy.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
So you just T into the pressure line and run it to the windshield check and do the same for the return?