• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Dash panel light ideas

Welder Sam

New member
1,430
6
0
Location
Glendale, Arizona
have u installed these? how well do they work? pics would be awesome but they tend to be a major league fail for this purpose. i found some leds for this purpose but quickly went back to my old bulbs cuz the beam was to narrow and made my gauges a dim gray. so im eager to see your results!
 

10MMGUNNER

New member
6
0
0
Location
ramsey mn
The dash lights on my m923 a1 were very dim so to solve this i drilled 1/8 inch holes in the green plastic covers.The bulb covers should be tight, put a mark on the cover that points directly towards the gauge next to it so the light from the bulb will shine throught the 1/8 inch hole and light up the gauge next to it. Drill the holes close to the gasket, some of my covers got 4 holes to light up gauges, they are nice and
bright now.
 
Top