Deuce Hub Bolt Circle Measurement?

[Flatlander]

Hey, does anyone know what the hub circle measurement is? I'm looking at some selectro hubs, and they have a 5.563 bolt circle measurement. I have seen 5.080 and 5.563 measurements, but I'm not sure what the correct one is for the Deuce hub. I called Milemarker, and they seemed to think that it was 5.080, but they seemed unsure! They did say I can buy parts for the Selectro hubs through them, so I just need to make sure I have a hub that can be converted!

 

[gringeltaube]

Just replied to your other post. Yes, it's 5 9/16" (or 5.563 or 141.3mm)

G.

 

[WillWagner]

I got 5.56x on the desplined ones I have. I'd do the 5.563 ones.

 

[Offroadfabworks]

11167-01 is the correct hub to get

 

[chevycrew]

I replied in other post as well.

 

[Flatlander]

Thanks, guys! I'm going to try converting a set of 11162-01 Selectros to fit the Deuce. I can get them cheap.

The specs are:
RDS 90 8-hole 5.563 bolt circle 34 spline

I am going to try to order the slider gear and the spacer that goes between the Selectro and the hub. MileMarker said today that I could order those parts from them. I'll take pics.

 

[chevycrew]

let us know what the overall cost is....