• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce is sporting a new coat

poof

Dirty Hippie
568
19
18
Location
Wisconsin, Watertown
Just did a repaint yesterday on the deuce.. had to match it to the M105a1 trailer i rehabbed.. that I took in trade on a paint job/body work I did on an M725 ambulance for a member here..so Just showing it all off...have to do the fuel tank and Tire stencils yet.. but all in all not bad for 5 hours tape and painting.. will look good in the Milwaukee Vet's day parade this year.

all the stencils are hand cut and painted.. even the Cadusus
J.P.
 

Attachments

poof

Dirty Hippie
568
19
18
Location
Wisconsin, Watertown
While i was shooting the paint with onboard AIR.. I had a fuel return line burst... Naturaly I was around the back of the truck and didnt see any thing... till the GF said.. "you know your leaking stuff up front"

:shock:

for about an hour i had a broken half painted deuce. with oil spots all over the all cleaned front end , ready for paint body. and no compressor other than the on board one to finish painting..
got lucky. I had just enough line and fittings to repair it and drive on..
:razz:
J.P.
 

John S-B

Well-known member
Steel Soldiers Supporter
1,796
1,048
113
Location
Ostrander, Ohio
That's what I'm doing with mine, athough I'm using spray cans and working MUCH slower. So far I have the front bumper and hardware done. :-| Your's looks awesome, thanks for the inspiration.
 

kcollum

Member
57
0
6
Location
Long Island New York
Poof, That looks great may I ask what color that is and maybe type and color code. My deuce has a older dark OD under the camo and I really like the look you have achieved and would like to do the same.
 

plym49

Well-known member
1,164
171
63
Location
TX USA
Fantastic. My favorite color and marking scheme for a Deuce. What did you use and what did you do for prep?
 

andytk5

Member
356
0
16
Location
florida
I just got a 1970 deuce that is desert tan and I have the rapco 686 tan in a gal and one more rattle can left from redoing my interior, dash, seats, etc.. to clean it up. I'd really like to tackle some of the exterior panels witht he gfallon now.

Can I use a small cigar roller to apply the paint? I plan to sand down the rough spots and take care of any rusted areas but everything is in good shape just needs some freshening. Thanks!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks