deuce personnel heater parts

[BFR]

anyone know where I can get the outlets that the supply/return lines for the personal heater on the deuce connect to? (the ones on the engine side)

 

[Lifer]

I imagine they're standard heater hose nipples that you can get at any auto parts store. (Someone will surely correct me if I'm mistaken. )

 

[jwaller]

surplus. other than that I'd use some hardware store nipples till you need the cutoff's like the Originals have.

 

[red devils dude]

there special purpose mil only "drain cock's" 3/8" NPT to 5/8" hose bib I tried to find them for
months then found two in my heater kit

 

[tshields]

Re: RE: deuce personnel heater parts

there special purpose mil only "drain cock's" 3/8" NPT to 5/8" hose bib I tried to find them for
months then found two in my heater kit

If I may ask, where did you get your heater kit and how much was it?

Thanks,

Terry

 

[red devils dude]

RE: Re: RE: deuce personnel heater parts

Saturn surplus $250 two or three years ago.

 

[Crazyguyla]

RE: Re: RE: deuce personnel heater parts

Joel,

I don't have one in front of me, but try these heater fittings from Motor Mite. They sells them in their Help! line at most autoparts.

PN's

56152 Universal - 5/8" Hose x 3/8" NPT x 1-1/2" Long - Metal

561520 Universal - 5/8" Hose x 3/8" NPT x 1-1/2" Long - Metal

56237 Universal - 3/4" Hose x 1/2" NPT x 2-3/4" Long - Metal

562370 Universal - 3/4" Hose x 1/2" NPT x 2-3/4" Long - Metal

hope this helps

 

[rdixiemiller]

RE: Re: RE: deuce personnel heater parts

Mine are 90 degree fittings with built in shut-off valves.

 

[BFR]

RE: Re: RE: deuce personnel heater parts

mine are there, but trashed I was thinking I would replace them when I swap out my heater.

 

[tshields]

Re: RE: Re: RE: deuce personnel heater parts

mine are there, but trashed I was thinking I would replace them when I swap out my heater.

Why are you planning on changing out your heater?

Terry

 

[BFR]

RE: Re: RE: Re: RE: deuce personnel heater parts

here is the short version...
mine is currently mounted directly to the side panel (this bugs me)
I was able to get the heater + the mount for less than the mount by itself
the new heater looks better than the old one