Difference Between 800 and 900 series Cabs

[mkcoen]

Not sure if this is in the FAQ section as I can't seem to pull it up, but was wondering if the 800 and 900 series cabs were generally the same. Meaning specifically if the back of the cab is the same dimensions and would the cab reinforcement panels for the deuce and 800 trucks work on a 900.

 

[doghead]

They are different widths.

 

[swbradley1]

If you want measurements or pics send me a PM as I have both at the house right now.

 

[clinto]

Cab brace for the 939 (not 900) and 809 (not 800) are definitely different.

 

[mkcoen]

Cab brace for the 939 (not 900) and 809 (not 800) are definitely different.

Sorry for using the short vernacular that most people on the forum use. Thanks to everyone that replied.

 

[M813rc]

Mark, basically, the 939 cab is about a foot wider than the 809 cab. Top, windshields, etc. are all wider. Come look at my stuff if you want to see.

Cheers

 

[mkcoen]

Mark, basically, the 939 cab is about a foot wider than the 809 cab. Top, windshields, etc. are all wider. Come look at my stuff if you want to see.

Cheers

Thanks Rory. The situation arose because a gentlemen purchased one of my cab reinforcement panels and then waited until after he paid for it to say it was for a 923. I wanted to verify there was a difference before shipping him something that wouldn't work. I did refund his money this morning but unfortunately PayPal took their bite out so it cost $4.10 for a refund. And for those wondering, yes the ad says for a deuce or 800 series 5 ton (809 for the correct people).