KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
You have any aditional info or pics of those adapters?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Do we have an official Bobbed Deuce picture thread? If not, here it is! Post em!
- Thread starter Kennay
- Start date
cuukvee85
Member
- 41
- 0
- 6
- Location
- tyngsboro/ma
I bought them off a friend who had them made for a custom chevy mud truck. He went to 5tons and sold them to me. As for pics, im snowed in right now but as soon as i can take a wheel off and take a picture i will post some.
sellbooze
New member
- 76
- 4
- 0
- Location
- Odessa, Florida
Some great looking trucks here. Wish I had the time to take on a project like that.
Cool pics everyone. I am wondering though, I see a lot of 46" tires on the trucks and I am thinking about putting some on mine. I am not so worried about potential rubbing as I am concerned about it being more physically harder to turn/steer the truck. You already have to muscle these trucks. Mine is a 71' deuce without any power steering or air assist for the steering.
Q: Do the larger more meater tires make it physically harder to turn street corners?
Q: How much difference is the turning radius from the stock tires to the larger 46" ?
Q: Do the larger more meater tires make it physically harder to turn street corners?
Q: How much difference is the turning radius from the stock tires to the larger 46" ?
hdmax
New member
- 188
- 5
- 0
- Location
- new Lexington, Ohio
I found this site just a couple days ago, and have spent way too much time looking and reading about a Bobbed deuce. (Never knew the word for a cut down 4x4 deuce .)
However I do have to say this is by far the nicest Deuce I have ever seen.
However I do have to say this is by far the nicest Deuce I have ever seen.
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
Its been almost 20 days since we had some Bobbed Deuce Porno Pictures. Whats up with THAT.
Its a rainy day in Georgia ... and I can't work on my truck.
SOMEBODY must have bobbed Deuce pictures to look at ...
oddshot
Its a rainy day in Georgia ... and I can't work on my truck.
SOMEBODY must have bobbed Deuce pictures to look at ...
oddshot
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
a rainy day here as well. i need some pics!
Ridgerunner
New member
- 791
- 6
- 0
- Location
- Holland, Mi
I guess I never posted pictures of mine in the "Official Bobbed Deuce" thread.Its been almost 20 days since we had some Bobbed Deuce Porno Pictures. Whats up with THAT.
Its a rainy day in Georgia ... and I can't work on my truck.
SOMEBODY must have bobbed Deuce pictures to look at ...
oddshot
So here ya go....as a new born and all grown up.
Attachments
How much did you lengthen your driveshaft?
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
VERY COOL. The variations of the bobbed jobs is amazing! There are tons of good ideas in this thread ... its part of the reason I keep bumping it to the top.
Now for the questions ...
1) I like the raised bed ... what is between the bed and the chassis?
2) The extra step on the drives side ... what is that made from?
3) My tired old eyes cannot quite make out what is painted on the hood. what does it say?
4) Is that the standard Pioneer Rack? It looks GREAT there.
and 5) Where's your taillights?
oddshot
Last edited:
Ridgerunner
New member
- 791
- 6
- 0
- Location
- Holland, Mi
1) I kept the M105 trailer frame attached to the box. My reason is, I'd like to turn it in to a dump box eventually, when I acquire the rest of the parts. So with the frame attached, the structure is there, just add some hydraulics and a hinge point.......someday..... when I learn how to weld.....someday.
2) I made the steps out of 1" 316 stainless steel tubing. I painted them OD, and some placed some grip tape in the bottom of the hoop. With the 8" lift, and the 53's, they make it easier to get in. (I no longer have to give the wife a boost, when she rides along)
3) It was stenciled "Loud & Proud" at some point, while it served in the military. It came out of the DRMO that way, when it was auctioned off. I guess some branches/companies allowed you to name vehicles in the motorpool.
4)Yes, just a standard Pioneer tool rack. I wasn't my idea to mount it there, so I can't take credit for placing it up there. When I was bobbing the truck, the rack was on the scrap pile. A friend of mine was over at the time, and pulled it off the pile, held it up to the box, as you see, and said "you should mount this here" I like the placement, thought it added to the look, so I went with it.
5) Where's my tail lights? Um.....on the back of the truck
When I bought the M105 trailer, the tail lights and mounting brackets were all smashed up. So when I mounted the box on the Deuce, I used some of the stake channel for the side racks. I capped the end of the channel for a cleaner look, other than the angle-iron that use to hold the taillights.
Here's some pictures, of what you were asking about. The picture shot from the rear, shows the tail lights, as well as the M105 trailer frame.
Attachments
Last edited:
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
Ridgerunner is that your black 50's corvette in pic. 2.
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
If you EVER repaint the truck ...
KEEP IT ON THERE!!! Along with the 1st Cav insigna.
VERY cool.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
oddshot
FMFDOC
Member
- 77
- 1
- 8
- Location
- Mount Airy, MD
LOTS AND LOTS OF DROOLING!!!!
ApopkaFL
Banned
- 596
- 0
- 0
- Location
- Middlesboro KY
Guess Ill add my 
to this thread. As to my own bobed deuce thread I started I am turning a A3 in to a 4 door with Suicide doors ( All 4 ) I am cutting the windsheld down also. Its a soft top so it should make things go smooth. I am also raseing the dude 8" installing 1600 R20 XZL with removing one of the rear axles. I plan on using the Deuce bed so I am going to remove how much I need from the center of it. I took all the access panels from each door and I am gong to insall 9" sub woofers in each door for the stero system. I plan on building a center consol to hold the radio/CB? and amp. The truck is going to be painted custom black with the new camaro green in a pin strip form.
to this thread. As to my own bobed deuce thread I started I am turning a A3 in to a 4 door with Suicide doors ( All 4 ) I am cutting the windsheld down also. Its a soft top so it should make things go smooth. I am also raseing the dude 8" installing 1600 R20 XZL with removing one of the rear axles. I plan on using the Deuce bed so I am going to remove how much I need from the center of it. I took all the access panels from each door and I am gong to insall 9" sub woofers in each door for the stero system. I plan on building a center consol to hold the radio/CB? and amp. The truck is going to be painted custom black with the new camaro green in a pin strip form.Attachments
DMaddox
Member
- 140
- 0
- 16
- Location
- Independence, Ky
heres m1ne
Attachments
DMaddox
Member
- 140
- 0
- 16
- Location
- Independence, Ky
Jack stands!
Attachments
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
DMaddox
Member
- 140
- 0
- 16
- Location
- Independence, Ky
I'll tell ya what, they started to get tired after about an hour but they didn't complain till i got home from napa with the jack stands the next day