Drive Belts for Cummins 250

[Gamagoat1]

Does anyone have part numbers for the drive belts on the 250 Cummins?
I'm going to replace all of them and thought I'd check here first.
Radiator is being boiled out now, engine has been flushed and T stat has been replaced. New hoses, water pump gasket and ring, It should run like new, I hope.

 

[texas-5-ton]

Hey Mike,

I will try and look tomarrow to see if the belts on my truck still have the numbers on them. I need to get a new thermostat as well. Do you have the part number for the thermostat handy??

Chad

 

[Gamagoat1]

Thanks Chad, I threw the box away but will try to find the bill.
Mike

 

[73m819]

i got a full set of belts from john winslow, i thought the price was real good, ill check the numbers off the wrapers tomorrow

he also had the hard to get lower rad. hose

 

[timntrucks]

i can check too for numbers, my belts arnt to old

 

[WillWagner]

Chad, what temp stat do you want? I think I have a stat and seal too! The stat I have will be a 180.

 

[Gamagoat1]

Chad,
The T Stat and seal number for the 250 Cummins is:
Napa 613080 and it's only $27.49 and 180 degrees.


The Cummins number is:
SGZZ 201737 180 F

 

[texas-5-ton]

Hey guys. That sounds great. Will , I really appreciate your help. 180 will be great !! Hey Mike, I looked at my belts and the numbers are gone. As a matter of fact, I think that I am going to have to replace ours soon as well.

 

[Gamagoat1]

Thanks Chad.
I'm taking mine in tomorrow to match. I'll post the numbers if I find matches.

 

[texas-5-ton]

Sounds great !!

 

[Gamagoat1]

Here are Part numbers (NAPA) for Cummins drive belts.
Power Steer. Napa #9470
Gen. Napa #7360
Fan/ Access. drive. Napa# 24407

Hope this helps someone.

 

[jimk]

The NAPA 25-7360 was near the end of my alternator adj slot. I returned them and got 7340's.

Update; The 7340's worked but were a challenge to get over the fan blades. If they were 1/2"shorter it would be a no-go and the fan would have to come off.... I'd say if there is a 7350 they would be ideal. Guess I tried to get too smart.

Thanks Mike.

ps- Nice looking 6x6 amphib