- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Blowout valve isn't holding pressure... If I hold the valve closed... It vents after about 5 seconds... My battery is dead on my phone and my tablet is 5 percent and falling...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
East coast to West coast trip - Free part taxi - standby assistance requested
- Thread starter TechnoWeenie
- Start date
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
Somewhere there is a blockage in your air system you need to troubleshoot. Start taking lines off in the air supply path find the problem. If you need a part there are people in Ohio.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Virtually no output... Gotta he clogged air dryer
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Can someone post a need help thread. Battery dying... WB oh tp. About 1 mile before Perrysburg just before Maumee river.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Don't take that too hard. Sometimes it seems like the world is almost designed to hit you like this. It happens to all of us.
Hope this problem of yours straightens out OK.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
I'm not sure of the drill here. Sounds like a job for a Mod:
- Any Mod monitoring this thread?
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Pressure is being held in dryer... Air is barely coming out. I need to bypass the dryer or something. Apparently the tools I brought with me suck..
I gotta get this outta here or they'll tow it... I literally cannot afford a 1k tow bill...
I gotta get this outta here or they'll tow it... I literally cannot afford a 1k tow bill...
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
#2533201743....but pretty dead. Trying local resources
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
You can get some fittings and temporarily bypass the air dryer.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Can someone get the connector dimensions for the input and output connection to and from the air dryer? Going to try and bypass but can't disconnect from body to bring it with me to parts store.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Need a ride. Lol
CBR Metalworks
Banned
- 526
- 6
- 0
- Location
- Winston-Salem, NC
Should have driven through Winston-Salem and bought one of those $100 air driers I have 
(apparently you headed north to visit family) I can't be of much help here, but bypassing the air drier should require minimal fittings and just a little time. I do understand getting to a store with fittings may be the tough part though. Good luck getting it fixed.
(apparently you headed north to visit family) I can't be of much help here, but bypassing the air drier should require minimal fittings and just a little time. I do understand getting to a store with fittings may be the tough part though. Good luck getting it fixed.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Got ride to Lowes. On road. Phone Battery dead. Ty
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Passed chitcago yesterday..
armytruck63
Active member
- 1,663
- 10
- 38
- Location
- Redlands, CA
Glad to see you're on the road again!
Plane Fast
Member
- 408
- 3
- 18
- Location
- Panama city FL
Awesome.
If you have a mutimeter, you could check the voltage at one of the truck batteries and make sure it's not over 14 volts (truck running). Then maybe you can make a quick battery charger from a cigarette lighter connection and wire it to one of the truck batteries. Just for emergencies. The other option would be to stop at a Walmart and buy a portable cellphone battery charger. I would get a 10000mA or bigger. Should not be but around $30 to $40. It take about three hours to fully charge, but it may last you the whole trip.(cell charging only, about 5 times)
Good luck
If you have a mutimeter, you could check the voltage at one of the truck batteries and make sure it's not over 14 volts (truck running). Then maybe you can make a quick battery charger from a cigarette lighter connection and wire it to one of the truck batteries. Just for emergencies. The other option would be to stop at a Walmart and buy a portable cellphone battery charger. I would get a 10000mA or bigger. Should not be but around $30 to $40. It take about three hours to fully charge, but it may last you the whole trip.(cell charging only, about 5 times)
Good luck
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Already wires. Back on the road for 2 hours and then...
%) %&%'=:%& (=')
Glad I don't have super singles.
Tire deflated... Dunno how or why.. Happened as I came off exit..
Barely felt it...
%) %&%'=:%& (=')
Glad I don't have super singles.
Tire deflated... Dunno how or why.. Happened as I came off exit..
Barely felt it...
Plane Fast
Member
- 408
- 3
- 18
- Location
- Panama city FL
Maybe its the tire valve. You can use some of the soapy water from the window wash bucket and splash on it. See if it bubbles.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
For sure that is no fun for you.
But it wouldn't be much of an adventure to follow for the rest of us here on the thread if everything went off without a hitch.
Hope the trouble for you is minor.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Inner tube has a small hole in it at the seam.
I'll blame MN roads for that...
They put my spare on then patched the hole and aired it back up... But the tire I was driving on was in poor condition from being.. Well.. Driven on when flat... they suggested only using it as a very short term spare.