jward1
Member
- 71
- 39
- 18
- Location
- dothan,al.
Just got a 1986 1038. Seems disclaimer sticker on valve cover says 1998? Does this mean engine has been changed? Taken out of service in 2015
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Engine change
- Thread starter jward1
- Start date
- 7,016
- 9,690
- 113
- Location
- Papalote, TX
Picture of the sticker please.
jward1
Member
- 71
- 39
- 18
- Location
- dothan,al.
Be tomorrow
jward1
Member
- 71
- 39
- 18
- Location
- dothan,al.
Got it
Attachments
jward1
Member
- 71
- 39
- 18
- Location
- dothan,al.
It’s got 1998 on sticker in a 1986 m1038
- 7,016
- 9,690
- 113
- Location
- Papalote, TX
I have never seen that sticker, certainly not the "usual" one for sure, take a picture of the back of the engine with the doghouse removed, you may have a 6.5L
- 3,003
- 4,420
- 113
- Location
- Olympia/WA
pretty much every HMMWV ends up going through a reset/rebuild at some point.
They have a large amount of money to spend bringing the truck back to reset condition, and even if it doesn't need anything they still do all of the major wear items like engine and transmission.
I'd be a lot more surprised to find the original engine from 1986 than finding one from 1998.
They have a large amount of money to spend bringing the truck back to reset condition, and even if it doesn't need anything they still do all of the major wear items like engine and transmission.
I'd be a lot more surprised to find the original engine from 1986 than finding one from 1998.
BLK HMMWV
Well-known member
- 1,588
- 513
- 113
- Location
- Pasadena California
It might be a home brewed sticker.
jward1
Member
- 71
- 39
- 18
- Location
- dothan,al.
Do they stamp any ser. Numbers on block like civilian vehicles
- 4,414
- 4,207
- 113
- Location
- Brentwood, Calif
Not uncommon…