• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Engine ground

Isaac-1

Well-known member
1,970
50
48
Location
SW, Louisiana
When I picked up my Mep-003a from GL the red cable was connected to the frame and black cable to the starter, which could give anyone good reason to double check.
 

cuad4u

Active member
268
88
28
Location
St Matthews, SC
When I picked up my Mep-003a from GL the red cable was connected to the frame and black cable to the starter, which could give anyone good reason to double check.
Ditto - The very first MEP 002A I picked up also had the red cable connected to the chassis and the black cable to the starter. I wonder if somebody did this to be "cute" or what. I hooked the red cable to battery + and black cable to battery -. After rebuilding 8 MEP generators I know better, but on the first one I did not. I was fortunate I did not cause any permanent damage.
 
Top