exhaust routing for M35/M35A1

[maddawg308]

Anyone have any good pics or diagrams of the exhaust routing for the original M35 or M35A1? I have an M35A2 with a bad exhaust stack, was thinking or re-routing it a-la early deuce and having a truck with the performance of a turbo deuce, but I can repaint into a Vietnam era truck, and it would look the part.

 

[doghead]

I think it might be a bit undersized(id) for a turbo engine. Definitely would need some custom fabbing too

 

[maddawg308]

Oh I would use larger diameter pipe, I would just have the pipe coming out in a different location, whatever the original location was. I can fab it up...might even put a muffler on it to sound a little less like an A2.

 

[Crazyguyla]

Mike,

look at this thread for diagrams and measurements: http://www.steelsoldiers.com/deuce/3333-gasser-exaust.html

 

[SEAFIRE]

Here are some:

We re-routed both of our M35A2 Exhausts similar to pic 2.....

we ran 3.5" pipe on one of them, and 3" on the original non-turbo before we added the turbo

We originally had mufflers on both, but have since removed one.

 

[jatonka]

The horizontal exhaust kits have to be out there somewhere. In a warehouse waiting for us to decide we want peace and quiet again. Tree hugger folks complained about the convoy smoking out all the beetles, so they stuck 'em up through the fenders. figure that? JT out

 

[doghead]

Tree hugger folks complained about the convoy smoking out all the beetles, JT out

And probably, those same tree huggers went to The Beetles concerts and got smoked up!

 

[Crazyguyla]

The horizontal exhaust kits have to be out there somewhere. In a warehouse waiting for us to decide we want peace and quiet again.

Memphis Equipment has the horizantal pipes. I just ordered all the pipes for my gasser. They have the pipes for the LD465 too. Could be pricey.

 

[hndrsonj]

What did the gasser pipes cost you from Memphis?

 

[txdodge43man]

SEAFIRE May I ask what the 3.5 exhuast cost to run?

 

[Crazyguyla]

What did the gasser pipes cost you from Memphis?

7521750 Pipe, exhaust 61.25
7061155 Tail Pipe 39.87
8345253 Muffler 105.51
7521749 Gasket, exhaust 7.38

The pipes are oversize frieght.

 

[SEAFIRE]

SEAFIRE May I ask what the 3.5 exhuast cost to run?

I think it was around $300 to $400 including the muffler...

That was back in 2006, and I've slept since then lol.

I do remember that the muffler shop had to special order the 3.5" pipe.

 

[Heat77]

I am a new owner of a M35a2 and will need to replace my exhaust it has rusted pretty bad at the top of the stand pipe and causing water to get down the pipe when it rains. Then when I start it up it shoots black wet water out onto the front left side of my deuce. What is the difference between the non-turbo and the turbo exhaust pipes. Mine is the non-turbo. Thanks for any help!

 

[jatonka]

M35A2 non turbo exhaust stack

Hello, I stock the non turbo stacks, you can PM me for details, John T

 

[A.M General]

I know this thread is old but it is a pertinent question, was the horizontal exhaust mounted behind the battery box and fuel tank or run overtop them? I can't tell by the diagram

 

[18operator]

Looking at the first diagram, to the left (behind) the battery box.

 

[Crazyguyla]

I know this thread is old but it is a pertinent question, was the horizontal exhaust mounted behind the battery box and fuel tank or run overtop them? I can't tell by the diagram

It runs behind both. The pipe hangs right inside and below the frame rail.

Marcus

 

[Charlie175]

My red truck was like that when I got it. Not the factory setup, but the FD had rigged it up that way due to them using the exhaust vent hoses on the Fire House