First Deuce, need some help

[ClintA]

I can not get the lights to work on my duece, The knobs on the left side of the stearing wheel do not turn. I took it off and put a little diesel in it, Any thing I am missing? And allso , under the truck, there is a break line that is disconeted and it lookes like a backwards (S). there is no fluid coming out of it and the breaks work just fine. It is under the drivers seat right above the trasfer case. There are two places it can go to, but I was wondering if anybody knows what it is all about?

 

[steelandcanvas]

The loose line is most likely the vent line for the master cylinder. The 3 lever light switch has lock, it's the lever on the lower right-hand side. It should be spring-loaded move it gently and you can move the top lever.

 

[Billy Bobbed]

If you are talking about the 3 lever light switch the right bottom lever is a lock,you need to hold it up or down( I have the digital switch now cant remember) to turn the lights on.

 

[area52]

You did go here - JATONKAM35s HOME ON THE WEB

and down load the operators manual (-10) for it right?

 

[steelandcanvas]

If you are talking about the 3 lever light switch the right bottom lever is a lock,you need to hold it up or down( I have the digital switch now cant remember) to turn the lights on.

UP.

 

[steelandcanvas]

You did go here - JATONKAM35s HOME ON THE WEB

and down load the operators manual (-10) for it right?

Thanks 52, that was going to be my next post/question.

 

[73m819]

You did go here - JATONKAM35s HOME ON THE WEB

and down load the operators manual (-10) for it right?

Of course he DID

 

[Ripcord01]

That was the first thing He did.

 

[mistaken1]

I can not get the lights to work on my duece, The knobs on the left side of the stearing wheel do not turn. I took it off and put a little diesel in it,

You have a diesel powered light switch?

Any thing I am missing?

The instructions. Please read them before putting 13,000 pounds of truck on the streets.

 

[micmccon]

Wow. Have you started the truck yet? If the light switch baffled you, the pull to stop feature might be tricky.

 

[Bad_Carp]

I can not get the lights to work on my duece, The knobs on the left side of the stearing wheel do not turn. I took it off and put a little diesel in it, Any thing I am missing? And allso , under the truck, there is a break line that is disconeted and it lookes like a backwards (S). there is no fluid coming out of it and the breaks work just fine. It is under the drivers seat right above the trasfer case. There are two places it can go to, but I was wondering if anybody knows what it is all about?

Why do I feel like I'm the straight man being setup for a joke?

 

[ClintA]

You have a diesel powered light switch?




The instructions. Please read them before putting 13,000 pounds of truck on the streets.

This duece will never see the (STREET) , I did not buy it to show off, it is a work truck and the (LOCK) will not turn.

 

[ClintA]

The loose line is most likely the vent line for the master cylinder. The 3 lever light switch has lock, it's the lever on the lower right-hand side. It should be spring-loaded move it gently and you can move the top lever.

Thanks for telling about the Vent line, The LOCK on the lights will not even try to turn and I'm afraid I will break it trying. Do I neet to pull out on it or push in or none of the above?

 

[Billy Bobbed]

The lock doesnt turn much,you lift it about about an inch tell it stops.Its spring loaded

 

[ClintA]

Why do I feel like I'm the straight man being setup for a joke?

Sorry no joke, I was just not born knowing everything.

 

[Billy Bobbed]

Thanks for telling about the Vent line, The LOCK on the lights will not even try to turn and I'm afraid I will break it trying. Do I neet to pull out on it or push in or none of the above?

It might be frozen.You should be able to move it easy.

 

[ClintA]

The lock doesnt turn much,you lift it about about an inch tell it stops.Its spring loaded

Thanks, but what do I do if the damb thing will not even turn?

 

[73m819]

Sorry no joke, I was just not born knowing everything.

WHY not, my X wife was, another of the 1000 reasons that I'm not still married to her

 

[ClintA]

It might be frozen.You should be able to move it easy.

I took it off and all the knobs, set it on it's end and have been dripping a little diesel and WD 40 in it, Good idea or bad? I do not know what else to do.

 

[ClintA]

Wow. Have you started the truck yet? If the light switch baffled you, the pull to stop feature might be tricky.

Gee thanks, you have been a BIG HELP