kenet3621
Member
- 179
- 4
- 18
- Location
- Blythewood SC
Super box. I know you will have a really cool build soon!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FMTV with Shelter, which model?
- Thread starter DanM7890
- Start date
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
Thanks for the heads up I have been doing a lot of research figuring out what I'm going to need. My focus right now is to get the M1081 running because I've had NO time with everything going on lately. :/
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
So I have a ton of extra panels I could use to redo the inside. My question is what's the best way to remove the current wall paneling. I wasn't sure how it was attached to the aluminum braces. I want to make sure all the holes are patched before I work on the interior.
Maybe the TM can answer some of your questions
http://www.liberatedmanuals.com/TM-11-5410-213-14P.pdf
http://www.liberatedmanuals.com/TM-11-5410-213-14P.pdf
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
Thanks for posting that but I didn't see anything in there regarding removing the panels. I did however notice I'm missing the inside handle and bars to make it a 3-point latch. Currently it's just a 1 point contact latch.
DrillerSurplus
New member
- 443
- 7
- 0
- Location
- Salt Lake City. UT
s-280 shelter dimensional drawing
The TM-10-5411-206-14 has some detail about procedures for repairs but also seems pretty vague on how panels are originally attached.
View attachment s-280_demil_12ft.pdfView attachment TM-10-5411-206-14 S-280 SHIELDED 1993.pdf
Here is a dimensional drawing for the S-280 shelter that may be useful. Unfortunately it doesn't specify how panels are attached to structural pieces.
The TM-10-5411-206-14 has some detail about procedures for repairs but also seems pretty vague on how panels are originally attached.
View attachment s-280_demil_12ft.pdfView attachment TM-10-5411-206-14 S-280 SHIELDED 1993.pdf
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
Well I know have (3) S-280 enclosures. I found a nicer one I will be using that is prewired. The box above will be for sale and is still on the trailer if you're interested, PM me. I will post pictures of the new box later.
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
Here's a couple pictures of the new ones. Both are wired.
Attachments
Overdrive
Active member
- 411
- 96
- 28
- Location
- Wentzville, Missouri
If anyone comes across an S280 with the dolly brackets give me a holler I am looking for one.
OD
OD
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
The first one I bought is in the classifieds and it has the brackets.
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
I need a place to upload all the images I've found of the S-280 in the back of an LMTV/MTV.
- 1,172
- 24
- 38
- Location
- Clifton, TN
Dan, I may have missed it in earlier posts. Are you going to have some sort of system for removing the shelter? It would be cool to have a way to lift slightly and drive out from underneath. This would give you your cargo truck back for days when you need to haul.
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Hickory, NC
I would love to have a system, but am not sure yet. As of right now I would have to take my trailer to work and use the forklift to take it off the truck and back onto the trailer.
KEN2
New member
- 23
- 1
- 3
- Location
- Myrtle Beach, SC
I have 1082 trailer and just bought s-280 shelter. think I will take skids off and bolt straight to trailer to lower it a little. found and trying to buy crunched camper for parts.
Have you doing anything yet? looking for advice... Thanks
Have you doing anything yet? looking for advice... Thanks
i would say skip the bed and get a japanese bed, you can just roll it up or hang it outside when youre not sleeping and save almost 50% space ,
Hermannator
New member
- 67
- 3
- 0
- Location
- San Antonio, TX
Work in progress. 1. I used standard lift cables with adjustable turnbuckles to attach the box since the kits I bought were actually for dollies not the LMTV. 2. I plan to transfer my ACS Box from the LMTV trailer to my bolster trailer. Lower height and easier to pull with other trucks.
Hermannator
New member
- 67
- 3
- 0
- Location
- San Antonio, TX
Page 25 of the S280 TM shows the lifting cables and the single lift point. Depending how tall your shop ceiling is, an overhead lift would be the easiest. I have a 5 ton hand crane in the shop which allows me to lift them up , drive out and lower whenever I need.
- 518
- 179
- 43
- Location
- Stoneville, NC
I'd like to see pictures of that setup (the hand crane in the shop).